two parts/components polyurethane adhesive(Direct factory)

Two-component polyurethane adhesive for machine

component proportion ratio is 100:25

Material-A

Material-B

Physical nature

orange-red viscous liquid (color based on your request to configure) 

brown-yellow liquid

viscosity

800-1000MPa.S(25°C) 

25-50MPa.S(25°C) 

density

1.02g/ml

1.02g/ml

package(as your request)

Plastic bucket or Tin bucket

Plastic bucket ,Tin bucket, Plastic pots

purpose

For air filter

storage

1. Material-A and material-B can store up 3-6 months.

2. To appropriate indoor storage above 15°C

cautions

1. It should be placed in dry rooms and can not be exposed to water, dampness and sun. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects.

2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up.

3. Brushing the Mold with release agent before pouring the glue into the model, keeping dry then pouring.