Home > Health & Medicine > Medical Supply > Disposable Medical Supplies > Medical Surgical Helix Tourniquet Radial Artery Compression Device

Medical Surgical Helix Tourniquet Radial Artery Compression Device

Medical Surgical Helix Tourniquet Radial Artery Compression Device photo-1
Negotiable MOQ: 200 Pieces (Price negotiable depending on order volume and customization)
Key Specifications
Get Latest Price
Business Type:
Manufacturer
Year Established:
2007
Factory Size:
1,000-3,000 square meters
Payment & Shipping
Payment Methods:
Port of Shipment:
gz
Delivery Detail:
Delivery time depends on order quantity.

Specifications

Medical Surgical Helix Tourniquet Radial Artery Compression Device
Comfortable and fixed
CE,FDA
Visiable and adjustable press

Medical Surgical Helix Tourniquet Radial Artery Compression Device

 

Instruction:

 

1. After the punctural operation is completed,pull the sheath out for 2-3cm; in the meantime; make sure no vasospasm occurs.If vasospasm is evident ,it  should be treated before the hemostasis procedure begins.

 

2.Align the front edge of the compression pad with puncture point ,then apply the device to patient.

 

3.Insert the Velcro band into strap slot on the wrist plate ,keep the top of  the  pressure indicator leveled with turn cap,affix the Velcro band firmly.

 

4.Rotate the turn cap following the allow indicating direction, tighten the turn  cap clockwise by three to five laps, the green pressure zone (100-200mmHg) represent safe pressure area ;if the indicator  is over the midline of the green zone, the pressure indicates approximately 150mmHg; keep rotating to yellow pressure 200-250mmHg,it suggests excessive pressure, then the device will lock up for protection from tissue damage.

 

5.When removing the sheath,compress both ends of wrist plate to yield   a small space allowing the sheath to be pulled out  without damaging the tissues, the pressure should be referred to the position of the green pressure indicator.

 

6.After appropriate time ,decompress the device by turning turn cap 1/2 to 1 full counter -clockwise circle every 45mins to 1 hour.If the bleeding re-occurs, apply compression until haemostasis is achieved and repeat above steps.

 

7.When haemostats is completed,rotating the turn cap counter clockwise,remove the tourniquet confirm no bleeding on the puncture  site and cover the puncture site with dressing.

 

Medical Surgical Helix Tourniquet Radial Artery Compression Device

Medical Surgical Helix Tourniquet Radial Artery Compression Device

 

 

 

Medical Disposable Radial Artery Tourniquet

 

 

 

Transparent and soft cushion

 

Visible and adjustable pressure

 

Comfortable and fixed

 

 

 

 

 

 

 

Medical Surgical Helix Tourniquet Radial Artery Compression DeviceMedical Surgical Helix Tourniquet Radial Artery Compression DeviceMedical Surgical Helix Tourniquet Radial Artery Compression DeviceMedical Surgical Helix Tourniquet Radial Artery Compression Device

 

Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer
Year Established
2007
Factory Size
1,000-3,000 square meters
Total Employees
51 - 100 People

Recommended Categories

Explore top categories and find suppliers for your specific needs