Contact Platform Support
Help CenterAutomatic Clay Brick Cutter Machine
Related Products
-
Box Feeder for Brick Making PlantUS$ 1,000 - 10,000MOQ: 1 Set -
SD350 Non-vacuum Clay Brick ExtruderUS$ 2,500 - 10,000MOQ: 1 Set
-
Brick Cutting Machine/block Cutting MachineUS$ 800 - 3,000MOQ: 1 Set
-
Non-vacuum Extruder Clay Brick MachineUS$ 1,900 - 3,500MOQ: 1 Set
-
Non-vacuum Clay Brick ExtruderUS$ 1,900 - 3,500MOQ: 1 Set
Specifications
Automatic Clay Brick Cutter Machine1.Full automatical.
2.Save manpower;
3.Energy-saving;
4.Brick cutter machine manufac
Automatic Clay Brick Cutter Machine
--description:
- Brick cutting machine belongs to building machinery; it is mainly used for producing standard bricks and hollow bricks..
- The surface of cut adobe table is made by stainless steel, resistant mud slide for friction, the work life can be extended several times.
Reduce slime, saving 30% oil. After wear, it is easily replaced, avoid scrap the whole machine.
--Structure characteristics:
1.Automatic freeing partial device, never cut obliquely, do not need to adjust.
2.Stainless steel drum dynamic table-board, mud bar can put in place automatically,
avoid waste mud, it can save oil than ordinary flat table-board.
3.Stainless steel push plate surface , the resistant gap, the work life can extend three times.
4.Orientation Angle with oriented arc make wire into groove accurately, it can reduce 70% wire for breaking on average.
5.High wear-resisting material craft, guide bar for hard chromium plating,
cooperate with composite guide bearing, small resistance, long service life.
6.High strength, big thrust ,applies for coal gangue and shale hard plastic and semi-plastic extruded products,
7.Suitable for all kinds of plastic & soft mud bar.
8.Even soft mud bar should be stated inadvance , using encryption roller table-board.
9.Push board maximum reciprocating frequency 41 times per minute. Can cut down and up double mud bar,high block.
--Flow Chart of brick making line:
Clay--Box feeder ---Belt conveyer---Double shaft mixer---Belt conveyer--JK series Double--stage vacuum extruder(can be chosen according to your annual capacity)--- Full-automatic brick cutting machine ---unloader(can be omitted according to your need)
1. box feeder:
Box Feeder is one of feeder’s equipments which balances and rations the materials that you feed in. By adjusting the height of flashboard and the speed of conveyor belt, it will control the quantity of feed-in raw materials, balance pug and internal combustion material proportionally, and crush the large soft mud.
2. Roller Crusher
The brick roller crusher is one of series auxiliary brick making machines, it is used for crushing the raw materials such as clay, coal gangue Etc.
Function feature: Improving the quality of brick by crushing the raw materials more finely.
3. Double shaft mixer
1) Double shaft mixer is mainly used to mix the shale, coal gangue, and slag etc thoroughly by its two screw blade shafts. The main wearing parts are alloy wear-resistant material, and the mixing shaft has been heat treated, making the machine have a long service life and reducing its cost.
(2) Double shaft mixer is also applicable to the steaming fly ash brick production line, the aerated concrete block production line, and the clay brick vacuum extruder production line, chemical and mineral industry etc. .
4. Vacuum Extruder:
Vacuum extruding Hollow clay brick machine is suitable for producing all kinds of clay bricks with different sizes and types.
Clay brick making machine-double stage vacuum extruder is the best choice to produce clay bricks. With the advantages of strong extrusion pressure, vacuum extruder, replaceable mold, extracting the air form the raw material so that can guarantee the compactness of the raw materials.
5. Cutter
This machine is mainly used to cut mud which is squeezed into blocks by vacuum extruder during production.
--Service policy:
1. Before sales: the device type;
for customer training and technical personnel;
according to customer request, design and manufacture products;
the company sent engineering and technical personnel to the user scene, planning for the optimal design of the flow field, and the solutions.
2. Medium-sales:Acceptance of the product;
Assist client protocol construction scheme.
3.After-sales: On-site training personnel;
Appoint special after-sale service staff, arrived at the scene guide clients installation and commissioning.
Send Inquiry to This Supplier
You May Also Like
-
Hollow Brick and Paver Block Making Machines Maquina BloqueraNegotiableMOQ: 1 Set
-
Fully Automatic Diesel Hydraulic Clay Brick Making Machine for Construction Material ProductionNegotiableMOQ: 1 Set
-
Pioneer High Capacity AAC Block Production LineUS$ 300,000 - 1,500,000MOQ: 1 Set
-
Hand Press Block Making Machine QTJ4-50US$ 5,000 - 10,000MOQ: 1 Set
-
Hollow Brick Making Machine for SaleUS$ 1,000 - 30,000MOQ: 1 Set
-
Billet Ccm Machine Slab Ccm Slab Making MachineNegotiableMOQ: 1 Set
-
Factory Price Clay Brick Making Machine With High QualityUS$ 1,000 - 8,000MOQ: 1 Set
-
732 Low Price for the Small Soil Brick Making Machine 0086-15136240765US$ 19,999 - 29,999MOQ: 1 Set
-
Construction Machine Mini Type Brick Making Machine QMR2-45NegotiableMOQ: 1 Piece
-
Cement Brick Making Machine and Automatic Fly Ash Interlock Laying MachineUS$ 500 - 2,000MOQ: 1 Set
