roof tile machine

Specifications

We can supply whole automatic glazed roof tile production line machinery.

 

Raw materialsusing shovel loader → 15M³ Feeder → Rolling granulator → 15M³ Feeder → Cage crusher → Two-shaft mixer → High speed crushing Rolls → Two-shaft mixer → High speed small crushing Rolls → Cylindrical type feeder → Homogenizing bin by shovel loader → 5M³ Feeder → Vacuum extruder → Automatic cutting →Forming press → drying car(loaded by manual work) → drying → glazed → tunnel kiln → packing → warehousing.

2.Description of all the process.

The raw material to the plant must be closely inspected in advance, then classified and deposited in the feed bin. Firstly, different kinds of raw material are required to be weighed and mixed in Feeder, then sent to Blender. The material Mixed by blender sent to Feeder again, and then sent to the cage crusher, the raw material that Out from cage crusher sent to the two-shaft mixer in order to stir uniformly, chopped into shreds. And after that, the material is delivery by a belt conveyer to the first high speed crushing. At this time, you can send quantitatively the raw material on the belt conveyer to the two-shaft mixer, for mixing. As for the second high -speed crushing roll, it makes a fine crushing of the material, which enables the material to meet the mixture ratio requirement for shaping of the granular particles. The finely grained material is transported by a conveyer belt to a cylindrical type feeder, for further, stirring, homogenizing and purifying meeting the more stingy requirement for the plasticity and the moisture content. After that, this material is sent by conveyer belt transportation into an ageing bunker for aging process, and thus raw material moisture becomes all the more equality, and its water ratio and plastic behavior become more and more proper for extruding and compacting.

For this material ready to use, a shovel loader, carry it to box type feeder, in our moulding shop. The box type feeder here charge the material into a vacuum extruder, then automatic cutting cut the semi-manufactured tiles up into all size. product compaction by Forming press. The semi-products are loaded manually on a dry car, then glazed by Automatic glazed that will burden the wares into a drying kiln. After well dried, the semi-products are manually loaded on a firing. At the end, the burned ceramic product is graded manually and packing into warehouse.

It should be point out, in the course of all technology production line, TCJ350 extruder, automatic forming press,spiral blade of extruder, high aluminium ceramic slice of clay tube, WDQ-2 automatic cutting are our patent technology and product, having our own intellectual property right, it make the producing procedure being more unique, advanced and scientific.