Good quality hot sale 304 knitted filter wire mesh

Anping Hualai Metal Wire Mesh Co.,Ltd

Good quality hot sale 304 knitted filter wire mesh

Introduction of knitted wire mesh 

1.knitted wire mesh Diameter Range:0.10mm-0.55mm (common wire through is:0.20mm - 0.25mm).

2.Hole Size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same,width is different).

3.The Surface Condition of knitted wire mesh: the flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications)

4.The Common Width of knitted wire mesh: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400mm, 500mm, 600mm, etc..

5.The Main Material of  knitted wire mesh: Aluminum wire, stainless steel wire, copper wire mesh, galvanized wire, mixed fabric, fibre wire, PTFE wire mesh, PP, PC, PE, etc.

6.Main purposes: mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding, for manufacturing a filtration device.  

Specifications of knitted wire mesh 

 Note: any specification is accepted

Detail Pictures of knitted wire mesh 

Production of knitted wire mesh 

Any questions please contact us, welcome your enquiry!