IGBT DC MIG/MAG Welding Equipment NBC-630

Specifications

Suitable for MIG and MAG weld, with wire feeder. Suitable for carbon steel,alloy steel, ect. DC MIG/MAG Welding Equiptment.

The features of DC MAG/MIG Welding Equipment NBC-630:

1. High frequency inverter, waveform control and soft switch technology, digital panel display, advance setup function;

2. Current and voltage can be regulated continuously at a wide range, automatic voltage pulsation compensation;

3. High welding speed, high success rate of  arc striking, convenient and considerable for operation with wire deliver device;

4. Compact structure, energy saving, high efficiency, less welding distortion;

5. We can also make the machine with AC 440v input voltage;

6. Applicable for sheet over 0.8 mm, continuous and discontinuous welder;

7. Suitable for carbon steel, alloy steel, soft steel, etc., and also suitable for various wire;

Complete accessories: welding torch, earth clamp, etc.

 

 

 

The parameters of DC MAG/MIG Welding Equipment NBC-630:

 

Model Spec.	NBC-630
Power supply voltage	AC 380±10% V / 50~60 Hz
Power supply capacity	35 kVA
Rated output voltage range	18-44 V
Rated input current	53 A
Rated output current range	80-630 A
Duty cycle	60%
Cosφ (η)	0.87
Welding wire deliver speed	2.5-13 m/min
Welding wire diameter	Φ1.0-2.0 mm
Protection grade	IP 21 S
Insulation grade	F
Net weight	60 kg
Weight of wire feeder	17.2 kg
Dim. of machine (mm)	635*326*530
Dim. of wire feeder (mm)	560*180*350

BUY WITH CONFIDENCE.
Quality machines manufactured by RONGYI.
Full service and parts back up.
12 MONTHS WARRANTY