Contact Platform Support
Help CenterBearing Heater Machine /bear Heater
Related Products
-
Good Quality Bearing Induction Heater for New DesignUS$ 450 - 1,000MOQ: 1 Set -
Induction Electric Boiler HeatingUS$ 1,200 - 15,000MOQ: 1 Set
-
Otc 6650 Magnetic Induction Heating SystemUS$ 1,200 - 15,000MOQ: 1 Set
-
Medium Frequency Induction Heating Power SupplyUS$ 1,200 - 15,000MOQ: 1 Set
-
Induction Heating Power SupplyUS$ 1,200 - 15,000MOQ: 1 Set
bearing heater machine /bear heater
this is the technology data for the bearing heating machine working demands
it could be show the bearing heating machine suitable for the bearing inner diameters 20-120mm
this is the bearing heating machine for the bearing heating working demands it could be best design for those machine working
this is the bearing heating machine for the machine
Advantages of BHM Serious Induction Heaters: | |
Control Method and Display for Users |
A Solid Industrial Design |
Power |
0.5-1.0kw |
Temperature control |
0-180℃ |
Voltage |
220V |
Time control |
0-99,59,, |
Current |
2.3-4.5A |
Continuous installation |
Yes |
adapt bearing inner diameter |
20-120mm |
Maintain temperature |
Yes |
largest bearing outside diameter |
260mm |
Automatic demagnetization |
Yes |
largest bearing width |
120mm |
Self-adjusting power |
Yes |
Largest bearing weight (kg ) |
15 |
Control panel (display) |
Digital Display |
Other parts (kg ) |
10 |
Forced air-cooled design |
Yes |
The host weight |
3kg |
Dimensions(cm) |
40*21*30 |
Frequency |
50Hz |
Overheatingprotection |
Yes |
this is the bearing heating use , it could be best suitable for the bear heating working demands
1, Connect the power (220V/380V) and instrument lights on.
2, Instructions in accordance with the instrument temperature, press“∧”or“∨”Set the heating to the desired temperature,Then Press"START"to Start,press"STOP"to stop.
3, Indicated by the instrument time,press “∧”or“∨”Set the heating time required,press the "START", and start the heating. Press the "STOP" to stop.
4, According to the work piece diameter select heating yoke, the work piece is heated sleeve on the yoke (or set the pole), the yoke on the transformer two pillars end face and pressed activities of yoke. (Note: in the column end face of the to wipe butter.)
5, Sensor sucked into the work piece, press the "START", and start the heating. Press the "STOP" to stop.
6, When the set heating temperature (time) reaches the set value, the machine automatically stops working.
7, Remove the work piece after the end of the installation.
this is the advantege for the bearing heating machine working demands it could be best suitable for the induction heating machine working demands use
this is the shipping and express for the bearing heating working
Send Inquiry to This Supplier
You May Also Like
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
Efficient Copper Cable Granulator for Scrap Wire RecyclingNegotiableMOQ: 1 Set
-
Waste Recycling Double Shaft Shredder Process Metal, Plastic, Rubber, Glass, WoodNegotiableMOQ: 1 Set
-
Automatic/manual Fluidized Bed Dip Powder Coating Equipment Line for Refrigerator Shelves ProductionUS$ 2000 - 40000MOQ: 1 Set
-
Rotary Kiln Plant Design Solution 500 TpdUS$ 2000 - 80000MOQ: 1 Set
-
Vertical Scrap Metal Baler With 5.5kW Motor & Safety Lock SystemNegotiableMOQ: 1 Set
-
Automatic Gabion Basket Wire Mesh Forming and Welding MachineNegotiableMOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
-
Made In China JOY 1330/1325 Portable Air Plasma Cutting MachineUS$ 2,000 - 6,900MOQ: 1 Set
-
Automatic Infrared Length Cutting SystemNegotiableMOQ: 1 Set
