300M Span ADSS Preformed Suspension Clamp, ADSS Cable
Specifications
ADSS Preformed Suspension Clamp, ADSS cableHigh Quality ADSS Preformed Suspension Clamp
Tension Clamps for ADSS cable
CE
1. Description
The Suspension Sets are designed to reduce static stress at the support point of ADSS cables, as well as ensure that the cable is cushioned against the dynamic stress of aeolian vibration. The combination of the Inner Protection Rods and Outer Protection Rods provides protection against cable bending stress, there is no other stress concentration, so that the fiber optic doesn’t produce extra loss in the cables.
Structure and Raw Material:
Housing Clamp------It is made of cast aluminum alloy, which is stable, better anticorrosive in aero and mechanical performance.
Rubber Insert------It consists of high-class rubber, compounded for resistance to ozone, weathering extreme high and low temperature variations and compression set.
Bolt, Nut, Flat washer, Spring Washer, Split Pin, Anchor Shackle ------ Electric power standards
Inner Protection Rods ------High strength aluminum clad steel (for single layer) and aluminum alloy (for two layers) for weathering extreme high and low temperature variations, high hardness strength, excellent elasticity, stain resistance, water resistance.
1. It is designed to connect straight pole and ADSS cables, or elevation angel less than 25.Pole and cable. The special specification: one unit per pole.
2. Select the specification model corresponding to the appropriate Cable Range, Load-weight or Span Length.
Structure:

| Preformed Suspension Clamp for ADSS cable | Cable Diameter(mm) |
| 9.0-10.0 | |
| 10.1-11.1 | |
| 11.2-12.2 | |
| 12.3-13.3 | |
| 13.4-14.4 | |
| 14.5-15.5 | |
| 14.5-15.5 | |
| 15.6-16.6 | |
| 16.7-17.7 | |
| 17.8-18.8 |
5. Packing& Shipping
- packing in Cartons according to clients' need
- shipping by sea or air

6. Services
Sample: Can provide by our factory
prist list: can provide by our salesperson
after-sales: one by one
contact:
Ms. Candy Foo
Skype: szhanxin4
Mobile: +0086-13510684370
email: fusq at
7. Introduction
Shenzhen Hanxin Communication Optical Fiber Cable Co., Ltd is a factory who mainly produce optical fiber products:
1.Outdoor Fiber Optic Cable(GYXTW,GYFTY,GYTA,GYTS,ADSS,GYXTC8Y,GYTA53 etc.)
2.Indoor Fiber Optic Cable(Simplex/Duplex indoor cable,distribution box,break-out cable,waterproof cable etc.)
3.FTTH(bow-type access cable,self-supporting bow-type cable)
4.Fiber Patch Cord(SC,SC,LC,FC,MTRJ,MU etc.
5.Accessories:Fiber Patch Panel,Fiber Splice Closure,Fiber Media Converter,Fiber Adapter
8. Certificate
contact:
Ms. Candy Foo
Skype: szhanxin4
Mobile: +0086-13510684370
email: fusq at
Send Inquiry to This Supplier
You May Also Like
-
Outdoor/Indoor 2400-2483 MHz/2.4GHz 12dB Omnidirectional Fiberglass WIFI AntennaNegotiableMOQ: 100 Pieces
-
Low Pim -150dBc 10dB Power Tapper 800-2700MHz N Type,US$ 3 - 15MOQ: 5 Pieces
-
698-2700MHz 3 in 1 Out RF Hybrid Combiner Coupler n Female 50 OhmNegotiableMOQ: 1 Piece
-
50 Ohm DC-3GHz 10W Dummy LoadUS$ 1 - 25MOQ: 1 Piece
-
Communication Relay Board S42024-L3237-A107US$ 10 - 2,000MOQ: 1 Piece
-
Optical SplitterUS$ 55 - 95MOQ: 100 Sets
-
UFL Base IPEX/UFL Connector for rf Cable Antenna and PCB ModuleUS$ 0.16 - 0.32MOQ: 100 Pieces
-
Uhf & Vhf 433 MHz 5dB Omnidirectional Fiberglass Walkie Talkie AntennaNegotiableMOQ: 100 Pieces
-
2400-2483MHz Wifi Fiberglass Omni 2.4ghz Dipole 9dBi AntennaNegotiableMOQ: 100 Pieces
-
Ameison 5.8GHz 5dBi High Performance Desktop Wifi Rubber Duck External Antenna for Huawei E5172NegotiableMOQ: 1000 Pieces

