UV water disinfection for Rain Water | Rain water UV disinfection

UV water disinfection for Rain Water | Rain water UV disinfection

Rainwater collection can be simple or complicated depending on whether or not you've planned for it before building or are retrofitting an existing structure. 

Rainwater purification has grown more complex due to the spread of pollutants on trade winds that travel all around the planet.  Mercury from coal plants in China spreads to the entire Western US.  When collecting rainwater or spring water plan to purify for bacteria and the presence of mercury and pesticides.  Rainwater purification and rainwater filtration need not be complex or costly, but treating rainwater must be thorough enough to account for the pollutants likely to be present.  Mercury and pesticides are now present even in pristine environments requiring rainwater purification even in these locations.  Purifying rainwater is similar to what would be done for high quality mountain spring water.

This device taking a special high-strength non-ozone UV germicidal lamp and it's inner wall using a special treatment of the micro carbon austenitic stainless steel. 

 Outside of the tube with a special polishing process, the water flowing through the tube is irradiated with a sufficient amount of 253.7nm ultraviolet line , so It has good bactericidal effect, but also effectively reduce the impact of ultra-pure water.

Advantages of CEET Uv Disinfection system for rain water 

- UV does not alter taste, odour, colour or pH of the water

- UV does not require the addition of chemicals
- UV does not impart toxic by-products into the water
- UV systems are compact and easy to install
- UV systems require very little maintenance
- Running costs are often lower than those of a household lightbulb

 Model No. Uv Disinfection system Price for rain water

Uv Disinfection system Components:

• 304 or 316 polished stainless steel reactor
• Quartz sleeve to ensure optimum working temperature, 
• 99.9% comprehensive, rapid and efficient sterilization rate 
• High output, physical sterilization, no attachment role, no secondary pollution
• All stainless steel case, the European craft, silky inner walls, no dead ends.
• Equipment clean, electro-polished, for high purify the environment.
• Electrical configuration of the device is suitable for world markets.
• Special exterior design, easier to use

UV DOSE

The units generate a UV dosage of at least 30,000microwatt-seconds per square centimeter (μW-s/cm2), even at the end-of lamp life(EOL), which is more than sufficient to destroy most waterborne microorganisms, such as bacteria, yeasts, algae etc….

As a general guideline, the following are some typical UV transmission rates (UVT)