Mineral Fiber

Specifications

1.Mineral fiber:2-8mm
2.Factory price
3.Use :road using
4. Ignition loss: 4-9% (800 grade)
5. L/C is acceptable

1.Mineral fiber introduction :

According to specified recipe, being melting in the resistance furnace and spurting and blowing by multi-roll centrifugal force into cotton fibers, and after being cut, separate, edulcorated and classified, Jinli Mineral Fiber is produced by the advanced techniques at present.

 

2.Physical and chemical properties:

Chemical composition	SiO2	Al2O3	Fe2O3	Ca+MgO	Na2O+K2O
	32-55	7-21	1-6	35-50	1-3
Colour	Gray White light yellow
The average length ofL mm	1.8-8 (Or according with customer needing )
The average diameterD um	3-8
Vector burning 800 C° / h	4-9%
Water content	≤1.5%
Capacityg/cm3	15-25
Slag ball content	0.5(mm) above			none
	0.25(mm) under			5-9

 

3.Mineral fiber Use:

It is now widely used in petroleum, chemical industry, electric power owing to its heat-resistance,water-resistance,noise-absorption and fine springy property etc.

JinLi Mineral Company has taken lead in developing and producing many kinds of function ,specialized fiber , which fiber is more slender more soft and simply operating by staff and with better intensity and also it is less dregs and easy to loose .It is well used in building and coating meterials, glass fiber products, fricting and sealing materials.

 

4.Mineral fiber picture :