Cement Fiber Board Equipment

Specifications

Cement Fiber Board Equipment:
1.Profoessional Engineers Teams;
2.Automatic Plants Design
3.Best After Sale Service

  

  

  

  

  

Item	Unit	Standard Fiber Cement Board
Density	g/cm3	<1.3
Anti-bend strength	MPa	>9
Heat conduction modulus	w/m.k	<0.29
Anti-impact strength	kJ/mm2	>2.0
Pull force of screw	N/mm	>75
Dry shrinkage rate	%	<0.2
Non-burn performance		In accordance with standard GB8624 First Class Non-burn Material

  

Fiber Cement Board Production Line

 

Fiber Cement board is one new type of waterproof and fireproof board. It has lots of advantages such as sound insulation, fireproof, waterproof, 

mouldproof, heat insulation, light, good strength etc.

The main raw materials are quartz powder(pulp), cement, hydrated lime powder,  paper pulp, wollastonite and other accessories( mica, glass fiber, etc.)

The production process of calcium silicate board:

1.Quartz plasma processing

2.Paper processing

3.Pulping

4.Seperation, mixing and slurry control

5.Molding, answer the billet and stacking

6.Maintenance and stripping

7.Autoclaved maintenance

8.Drying

9.Sanding, edging and chamfering

Standard calcium silicate board dimension:

Length: 2400-2440mm

Width: 1200-1220mm

Thickness: 4-30mm

It adopts slurry flowing method or hatschek method.We will provide one-stop service.

Item	Unit	Standard Fiber Reinforced Calcium Silicate Board
Density	g/cm3	<1.3
Anti-bend strength	MPa	>9
Heat conduction modulus	w/m.k	<0.29
Anti-impact strength	kJ/mm2	>2.0
Pull force of screw	N/mm	>75
Dry shrinkage rate	%	<0.2
Non-burn performance		In accordance with standard GB8624 First Class Non-burn Material

 

Technology:

Calcium silicate/ fiber cement board use inorganic mineral fiber or cellulosic fiber as reinforcement agent and siliceous material and calcareous material as main cementitious material. Process stages include: slurry preparation, board forming, stacking, pre-curing, module stripping, autoclaving and curing. To increase board quality, drying stage as well as sanding, edging and painting stages are added, which also increased additional value of board. Process technique contains molding –pressing process, flow-on process and hatcheck process.

 

Main raw material:

Reinforced fiber (pulp, wollastonite, glass fiber, mica, chrysotile and so on.), siliceous material (quartz powder, fly ash, diatomite and so on.), calcareous material (unslaked lime powder, cement) and additives.

 

Standard of production:

Fiber Cement board production based on Industry Standard JC/T564-2008—“Fiber reinforced fiber cement board”.