plasterboard manufacturing machines/ Gypsum Board Production Line

Type of equipment for paper gypsum board production line:

1) hot air drying type

2) heat conducting oil drying type

The above production line equipment is semi-automatic and automatic two types.

Plasterboard can get rapid promotion and application, and its superior technical performance is inseparable, can be roughly summarized as the following aspects:

(1) low production energy consumption. The energy consumption per unit is 78% lower than that of cement.

(2) light insulation, with paper plasterboard as partition wall, the weight is only 1/4 ~ 1/3 of the brick wall. At the same time, due to the porous structure of gypsum board, its thermal conductivity is 0.30, compared with brick (0.43) and concrete (1.63), the thermal insulation performance is excellent.

(3) with excellent fire performance, because gypsum heat to release water, therefore, with paper plasterboard for wall, its fireproof limit can reach more than 2h.

(4) good decoration function, paper plasterboard surface is smooth, the board between the board through the cement material can be firmly bonded together, form a seamless structure, good architectural decoration effect.

(5) good construction, paper plasterboard can nail, saw, sticky, construction is very convenient, use it as decoration, can get rid of the traditional wet method, greatly improve the construction efficiency.

(6) comfortable living function. Due to its unique "breathing" performance, plasterboard has the ability to adjust indoor humidity and make living comfortable.

(7) high production efficiency. Conducive to the realization of large-scale production, in a variety of building boards, paper gypsum board production efficiency is **, than fiber gypsum board, cement pressure board production efficiency is 310 times higher, in foreign countries have an annual output of more than 40 million square meters of equipment, convenient for large-scale production.

Gypsum board production line, is composed of raw material supply system, plate system, conveying system, horizontal system, drying system, out of the board system, cutting edge system, used to produce gypsum board special equipmen

Production of raw materials

Gypsum, desulphurization gypsum, phosphogypsum, citrate gypsum, fluorogypsum, etc.

1. Lb-4 hydraulic automatic walking gypsum wallboard molding machine integrates the advantages of similar equipment at home and abroad to solve the traditional weight and strength of gypsum wallboardPlasterboard production line.

Equipment characteristics

Low, poor resistance to water and moisture and other shortcomings, the overall performance of the equipment to the domestic leading level;

2. The core components of the equipment are produced with imported materials, with excellent quality, small space, convenient operation and high production efficiency;

3. Good flatness, small error, anti-deformation, adjustable length and durable;

4. One equipment can produce gypsum board of 60mm, 90mm, 120mm, 150mm and other thickness and specifications;

5. The equipment forms two gypsum wallboard at one time, and the raw material is automatically measured to ensure the quality and precision of the wallboard;

6. Hydraulic opening and closing die is adopted, the core tube system is made of new silica gel material, and the air pressure expansion mode is designed to reduce the resistance of the pipe to zero, and the damage rate of the formed plate to zero. Tube threading and tube drawing are completed synchronously, the core tube does not need to be flushed.

7. The key components and parts of gypsum board molding machine are made of internationally renowned brand products. The core parts and components have undergone fatigue durability test and reliability test, so as to ensure stable operation of the equipment and minimize the failure rate.