LED lamps and lanterns production equipment LITUO

Bulb lamp aging production line

Fluorescent lamp aging production line  

3, Basic configuration and structure

1, The motor power: Taiwan Dongling company. 1.5KW motor, WPS60/100 type reducer, Mitsubishi inverter, frequency conversion stepless speed regulation, adjustable aging time 30min-24h.

40, The frame is made of 2 * 40 steel pipe welding, the body is made of aluminum alloy with 130 * 23 aging lines, the body is made of aluminum alloy, and the supporting plate is made of 1.2mm cold plate bending.

3, The Hangzhou chain conveyor chain factory produced C212 inch high strength double chain.

4, A chain plate: the 1.5mm cold bending plate rolling into 148 * 1400mm, across the board a total of 144 piece of supporting plate, each plate installed socket, 16PCSE27, and fluorescent lamp holder 4 sets. Also all chain plate is installed four conductive copper brush, aging area in the upper and lower rotating the upper part of the chain, that is across the board a total of 144 piece of supporting plate. 2304PCS ball lamp or 576PCS fluorescent lamp in the aging.

5, Conductive rail: the full range of two road conduction rail, the use of high quality PVC insulating rubber pad, the assembly of 25 x 50X2mm stainless steel aging dedicated conductive track.

6. Constant temperature area: the constant temperature system adopts electric heating type, high temperature and high pressure area is equipped with 8 1000W/ electric heating tube, the temperature and temperature 0-60 can be adjusted, the PLC screen is displayed.

7, The detection of the impact of the electric circuit: the impact of the aging area for the beat switch life of the aging control zone. Using PLC control, off time can be set from 1-10 seconds

8, Across the board from the into a power point, lights on the aging line is no break aging, the aging voltage and the way by the host controller.

11, The aging process: A section of the product on the assembly line area (at the end of the machine), -------B segment for each voltage aging area.

12, The full range of voltage power: three phase AC 25KW.

13, Electrical control: voltage, temperature control instructions using digital display, the whole system using PC touch screen control, using 1 power distribution control cabinet installation. With the operation of the touch screen and emergency stop switch.

14, The body color: white line chain plate computer spray, aluminum alloy as the primary colors, the white color with computer

The above pictures are taken in our customer factory, the actual production and use of the results

4,Equipment technical parameters

Createtop brand semi automatic printing machine can produce bulb lamp,

fluorescent lamp (the longest 1.2M/1.5M)

The company has set up the equipment exhibition hall in Shenzhen,

welcome the foreign friends to come to visit.