electronic car battery charger module for ev charging station

Specifications

1.car battery charger module for ev charging station efficiency above 92%
2. multiple protection
3,lighter and smaller size

car battery charger module for ev charging station detailed specification :

 

 

	Type and Model
			Quick Charging
Parameter			TH700Q15NZ	TH450Q14NZ-A	TH700Q17NZ	TH400Q35NZ	TH600Q25NZ	TH750Q20NZ
Input	Input voltage		380V AC±15%, 3 phase		380V AC±15%, 3 phase
	AC input frequency		45Hz ~ 65Hz		45Hz ~ 65Hz
	Efficiency		≥92%	≥93%	≥93%	≥92%	≥92%	≥92%
	Power factor		≥0.99 (APFC), or ≥0.93 (PPFC)
Output	Output voltage		450-750V	300-450V	400-700V	200-400V	300-600V	450-750
	Output current		16A	14A	17A	35A	25A	20A
	power		12KW	6KW	12KW	14KW	15KW	15KW
	Start delay		3 ~ 8s
	Total harmonic current		≤ 5% (APFC), or ≤ 30% (PPFC)
	Current stabalization		≤ ± 1%
	Voltage stabalization		≤ ± 0.5%
	Current sharing imbalance for Rectifiers Parallel		≤ ± 5%	≤ ± 3%	≤ ± 3%	≤ ± 5%	≤ ± 5%	≤ ± 5%
Cooling method			Forced cooling with fan
Protocal			RS485 and RS232, CAN
Protection	Multi-protection		Multi-protection and Warning, including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared. Output DC voltage and current adjustable, output over or under-voltage set-point adjustable, output over-current set-point adjustable
	Automatic current limiting		The output current will keep fixed without increase after it exceed the set point.
Environment	Operation ambient temperature		-20°C ~ 50°C
	Storage temperature		-40°C~ 60°C
	Relative humidity		≤ 90%
	Air pressure		70 ~ 106kPa
Safety	Insulation resistance		I/O to chassis and input to output >10MΩ (Test voltage: 500Vdc)
	Dielectric strength		Impose 2500Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover
Mechanical	Size (H × W × D) mm		482×88×500	450×85×260	482×88×500	680×133×600	680×133×600	680×133×600
	Weight		20kg	10kg	20kg	46kg	46kg	46kg

 

key characteristics :

 

1. use power factor correction technology, low pollution to the grid

2. use automatic current sharing technology . several modules can work in parallel operation , whihch expand the output power .

3.built in radiator , fan cooling

4. Multiple protection , including over temperature , over current ,over voltage ,reverse connection protections .