110V/220VDC intelligent high frequency switch mode industrial rectifier

Specifications

1.Soft-switching in all process
2.Small size and light weight
3.Modular design
4.brige rectifier
5.Hot swappable

 

Specification			TH230D20ZZ-3
Output current(A)			20
Power(KW)			6
Weight(kg)			17
Cooling method			Natural cooling
Interior radiator temperature rise			≤30°C
Input adjustment range(VDC)		minimum	304
		Typical value	380
		maximum	456
Output voltage range(VAC)		minimum	190
		Typical value	230
		maximum	300
Stability  precision of voltage			±0.5%
Stability  precision of current			±1%
Power factor			≥0.93
Efficiency			≥96%
Maximum noise(dB)			50
Storage temperature(°C)	minimum		25
	Typical value		60
	maximum		-10
Working temperature(°C)	minimum		25
	Typical value		40
	maximum		±3%
Current share imbalance			±5%
Soft start time (s)			3~8
Ripple coefficient			≤0.5%
Over current protection			When output current over point value, it will stable output. The output current will not increase.
Output shot circuit protection			When short circuit the module will automatic protect itself. When the trouble is over ,the module recovery to work.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

l Digit display

• Voltage, current, alarm and power off information
• V/A Switch button for display the output voltage and current alternately
• 3 digitals display, the voltage accuracyis ±0.5V (±0.1V of 48V/24V), current accuracyis ±0.2A.
• View fault code by pushing V/A Switch button when alarms
• Display OFF when push the V/A Switch button when the rectifier module is off.  

l Indication light

Three lights on the front panel, the functions are as follows table 3-12

Table 3-12

Define	Normal	Abnormal	Reasons
Power light (green)	on	off	No input voltage or damage may lead to internal auxiliary power supply does not work
Over temperature light (red)	off	on	Overheating inside
Fault light (red)	off	on	internal fault such abnormal input, over/under voltage/current

 

l Display switch button

The Display Switch button is used to switch what LED displays. If output voltage info on the LED screen, get the output current info by pushing the switch button. When push again, get output voltage back.

 

l Manual adjusting voltage button

Two buttons embedded in the panel are used to adjust the output voltage in the manual mode. The output voltage will get down 1V (0.2V of 48V/24V models) when push left button“∨”. And the output voltage will rise 0.50V (0.1V of 48V models) when push the right button“∧”.

 

 

l Fault Display 

The alarm information in fault code is displayed in the LED screen. The fault code

 

definition is as table 3-14. Press the V/A Switch and get the voltage info back in the screen.

 

Table 3-14 fault code definition

 

 

l Communication Function 

Communicate with superior end via RS485. Transfer the output voltage, current,

 

protection and alarm information to superior end and execute the superior commands.

 

 

Table 3-15 Communication function