Hot and Cold Impact Testing Machine
Hot and cold impact testing machine
Hot and cold impact test chamber is also known as hot and cold impact testing machine, used to test or
composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.
Hot and cold impact testing machine | |||||||||
Equipment specification |
TGDCJ-80AB |
TGDCJ-150AB |
TGDCJ-250AB |
TGDCJ-512AB |
TGDCJ-010AB |
||||
Workroom Dimensions (cm) |
50x40x40 |
60x50x50 |
70x60x60 |
80x80x80 |
100x100x100 |
||||
Temperature Range |
A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C D: -80°C-150°C |
||||||||
Fluctuation/Evenness |
±0.5°C/±2°C |
||||||||
Conversion time |
5s |
||||||||
Recovery time |
5min |
||||||||
Time needed for heating |
RT°C~200°C≤30min |
||||||||
Time needed for cooling |
RT°C~-65°C≤60min |
||||||||
The low temperature zone temperature range |
-65°C ~ -10°C |
||||||||
High temperature control |
RT+10°C ~ 200°C |
||||||||
The machine noise |
≤72 dB(A) |
||||||||
Load on the largest |
≤20kg |
||||||||
Equipment installed power |
~21.5KW |
~25.5KW |
~32.5KW |
~36.5KW |
~42.5KW |
||||
material |
The studio:# SUS 304 stainless steel |
The outer wall:Cold plate coating/#SUS304 |
|||||||
Wind Cycling Way |
Centrifugal fan-broadband type forced air circulation |
||||||||
Refrigeration Way |
Single stage compression refrigeration |
||||||||
Refrigerater |
French Tecumseh |
||||||||
Refrigerants |
R4O4A USA Dupont environmental protection refrigerant(R404A & R23) |
||||||||
Condensing Way |
Air-cooled or water-cooled |
||||||||
Heater |
Nickel chrome heating wire heater |
||||||||
Water Suplying Way |
Automatic cycling water supply |
||||||||
Control instrument |
OYO-8226P or HLS980 |
||||||||
Design criteria |
GJB150.5 GJB360.7 GB/T2423.22 GB10589-89 GB11158-89 |
||||||||
Standard Accessories |
1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 The sample is put aside frame 1 bag of wet and dry bulb, 3 fuses, 1 power line. |
||||||||
Safety device |
Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
||||||||
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Flexible Cellular Polymeric Tensile Tester for Medical and Industrial Foam ApplicationsUS$ 3000 - 20000MOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
HST Spring Dyno Friction Leakage Fatigue Testing MachineUS$ 5000 - 10000MOQ: 1 Set
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
-
New Design Measuring Meter With Best PerforanceUS$ 1,000 - 1,200MOQ: 1 Piece
-
XK-1 Rotary Switch Life TesterNegotiableMOQ: 1 Set



