OEM Acceptable Factory Design High Temperature Burn-in Machine Price
OEM acceptable factory design high temperature burn-in machine price
This high temperature burn-in machine is designed and manufactured accord to the requirements of IEC 60884, IEC60598 and relevant standards. It is use to simulate a high temperature environment to test the ability of material to withstand thermo-mechanical stress. This machine can be wide used in many industries such as Electrical Appliances, Electrical wire accessories, luminaries, motors, connectors, etc.
This machine has the advantages of easy operate, fast heating, high precision, temperature be even and stable.
High temperature burn-in machine | ||||||||||
| Specification | TGH-100UA | TGH-150UA | TGH-250UA | TGH-500UA | TGH-010UA | |||||
| Workroom Sizes W*D*H (cm) | 50x40x50 | 50x50x60 | 60x60x70 | 80x70x90 | 100x100x100 | |||||
| Inner chamber volume(V) | 100L | 150L | 252L | 504L | 1000L | |||||
| Outer dimension W*D*H(cm) | 98x95x160 | 98x105x170 | 108x112x180 | 128x125x200 | 148x155x210 | |||||
| Packing Size | 113x110x175 | 113x120x185 | 123x127x195 | 133x140x215 | 163x160x225 | |||||
| G.W(kg) | 360 | 390 | 450 | 480 | 620 | |||||
| Temperature Range | RT+10℃-300℃ | |||||||||
| Temperature Fluctuation | ≤±0.5°C(standard)/≤±0.2°C(optional) | |||||||||
| Temperature Evenness | ≤±2°C | |||||||||
| Temperature Deviation | ≤1°C | |||||||||
| Accuracy | 0.1°C,1.5%R.H (standard)/0.01℃,1.5%R.H(optional) | |||||||||
| Humidity Range | 20%~98%R.H/10%~98%R.H(optional) | |||||||||
| Humidity Deviation | ±2% R.H | |||||||||
| Temperature Rise Speed | 0.5°C~5°C/min(programmable) | |||||||||
| Time needed for heating | RT°C~250°C≤60min | |||||||||
| The machine noise | 72 dB(A) | |||||||||
| Load on the largest | 100kg,≤20kg/layer | 150kg,≤26kg/layer | 260kg,≤30kg/layer | 260kg,≤40kg/layer | 300kg,≤60kg/layer | |||||
| Equipment installed power | ~3.25KW | ~3.55KW | ~3.95KW | ~5.5KW | ~6.25KW | |||||
| material | Inner chamber:# SUS 304 stainless steel | The outer wall:A3 carbon steel plate with plastic spray/#SUS304 | ||||||||
| Wind Cycling Way | Centrifugal fan forced air circulation | |||||||||
| Heater | Nickel chrome heating wire heater | |||||||||
| Humidifier | Semi-closed steam and wet | |||||||||
| Water Suplying Way | Automatic cycling water supply | |||||||||
| Controller | Japan OYO/Korea Temi | |||||||||
| Standard Accessoriesparts | 1 Observe window(double-deck cavity toughened glass),50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze,3 fuses,1 power line | |||||||||
Send Inquiry to This Supplier
You May Also Like
-
Oil Bath PotUS$ 760 - 760MOQ: 1 Piece
-
Laboratory Water-jacket or Air-jacket Heating Cheapest CO2 Incubator PriceNegotiableMOQ: 1 Set
-
Low MOQ LRH-500F Laboratory Intelligent Digital Biochemical EquipmentUS$ 4,000 - 4,850MOQ: 1 Piece
-
Chemical Laboratory Thermostat Digital Temperature Controller for IncubatorUS$ 116 - 156MOQ: 1 Set
-
SELON-LHS-50CH HTEMPERATURE AND HUMIDITY CHAMBERUS$ 2,300 - 2,300MOQ: 1 Set
-
Dry Bath IncubatorNegotiableMOQ: 500 Pieces
-
DY-GTL-XC Multi-function High Precision Portable Temperature Dry Block CalibratorNegotiableMOQ: 1 Piece
-
Digital Dry-Type Thermostat Lab Block Heater 2 Aluminum BlocksUS$ 260 - 300MOQ: 1 Piece
-
The Tohhe Mini Metal Bath JXMINI-80 Laboratory Dry Thermostat Can be TimedNegotiableMOQ: 1 Combo
-
Thermo Shaker TS100US$ 450 - 500MOQ: 1 Piece














