Hollow core slab machine concrete struction

1)It can produce hollow core or solid  floor slabs.

2)The length can be cut as per the special construction design.

3)Low labor force, high efficiency, neat appearance,accurate dimension.

4)High intensity which can surely meet your demand.

2.Technical parameters:

Thickness of slab :200mm

Width of slab :1200mm

Holes:6 Holes

Working capacity:1-1.2m/min

Steel cable Use:Ø12.7mm

Max Span:10.2M

Motor Power:1x11KW

Vibrator Power:1x5.5KW

Dimension:3000x1500x1300mm

Machine weight:2900KGS

3.Machine Maintenance:

1)To clean the residual concrete on the key parts, such as the bottom of the vibration, the bottom of the planishing panel, dabber, side moudling board, vibration four corners everyday.

2)To add lubricant. Note: no lubricant add to the rubber washer.

3)If the machine works for three monthes (working time), the speed reducer should be cleaned and lubricated. Also, it is also need to change the lubricant for the machine with less than three real work monthes every two year.

4)To check the engine oil volume regularly.

5)The oil of the speed reducer is 20# gear compound but not other oil.

6)To check all the fasteners every shift.

7)To change the parts of the forming machine in time. For example, the tooling sunks for 2-3mm.

8)The deviation of the vibration foot cap and the central of vibration upright is beyond 5mm, please change rubber on time.

Pic showed of hollow core slab machine:

Finished slabs;

More details and quotations please feel free to contact with :

Whatsapp/viber/wechat/mob: +86-13305052785 (Ms. Celia Wong )