wire quick vice, strand quick vise, quicklink, wire splice

wire quick vice, strand quick vise, quicklink, wire splice, wire vise
This product is produced by Guangzhou Hotlink Hardware Co., Ltd, a subsidiary of Guangzhou Horizon Printing.

About the wire quick vice
It is a good way to anchor the wire to a corner post: The wire is passed through a hole drilled into the corner post and is anchored on the far side.

QuickVise serie products are specially designed to fasten H-T wires without any supporinting tool.
Simply insert the wire into the hole of QuickVise, the wire is gripped by spring-loaded clamps in the QuickVise which tighten more securely as the wires are

pulled harder. While using QuickVise , a 3/8 inch hole should be drilled in the end of the end post for the wire, the wire is then inserted through the

QuickVise which automatically holds the wire by its unique patented jaw system.

This will save you a lot of time, labor - and money!

Catalog Number                               Strand Range(mm)                           Maximum Holding Strength(LBS/KG)

QuickVise -6056                                  2.0-2.5                                                1148LBS/520KG

QuickVise -6058                                  2.6-2.9                                                1545LBS/700KG

QuickVise -6062                                  3.0-3.5                                                2250LBS/1020KG

QuickVise -6064                                  3.6-4.0                                                3240LBS/1470KG

About Guangzhou Hotlink Hardware
Guangzhou Hotlink Hardware focuses on cable connectors. The current products line cover Wire quick vise, QuickVise, QuickLink, QuickVise, FastLink series of all

speicifications, with quickly upgoing market in North America, South America, Europe and Australia.

Looking for a professional manufacturer of strandvises? For more detail and similar products, Contact now and you'll be answered in 24 hours.