automatic shrink tunne withl web sealer

Specifications

s.s & m s body automatic lenght control PID control high quality heating elements with infeed & outfeed conveyors power 8-10kw

Automatic web sealer with shrink tunnel machine is a suitable for shrink packing of various size of bottles and cartons etc. in a wide range of consumer packs with desired shrink tunnel..

APPLICATION: All types of bottles cans cartons matrix of boxes matrix of boxes without trey or bottom etc can easily be packed with this machine.

FEATURES

State of art technology.

Electro-pneumatic technology used.

Compact and robust machine.

Automatic length control through proximity sensor with push cylinder. Sensinadjustable to accommodate a variety of box sizes.

Real time mimic for input and output signal.

Very simplified operation and low maintenance.

Automatic collator (automatic connectivity with previous process)

Adjustment for 2 line of boxes.

SPECIFICATIONS

Machine        Web sealer:          

      Sealing type                    cut and seal (small 1 mm sealing).

      Packing matrix 1x6 or 1x4

Film width                      400 mm max.

Film thickness               50 to 70 microns

Packing range               300x200x200mm max.

Motor                             90w Single phase 220 V AC, 2nos. for      pre-pulling

                0.5 hp for in feed conveyors

                0.5 hp for tunnel conveyor

                0.5 hp for blower

Temp. Controller           Digital (PID) relay output

Heater (front Sealer)  Pencil Heater (220 VAC 1500 KW)

Only open wide web (LDPE) can be run on this machine.

Power requirement       :

Web sealer    : 220 V AC 50 Hz Single phase 3.5 kW (max)

       Shrink Tunnel                : 440 v Ac 50 Hz three phase  12 Kw

       SHRINK TUNNEL

Complete M.S. covered Structure.

Power connected load 12 Kw / 3 phases.

Consumption 8 – 10 Kw.

High quality heating element.

In feed conveyor length 18” out feed conveyor length 18” &

Chamber length: 4 Feets.

Digital temperature controller (PID) relay output

Motor : 0.5 hp 2nos..

Conveyor height From Ground Floor 850mm.