Contact Platform Support
Help CenterGround Carbide Rod for End Mill
Related Products
-
Carbide RodUS$ 75 - 86MOQ: 20 Kilograms -
Tungsten Carbide Rod for End MillUS$ 75 - 86MOQ: 20 Kilograms
-
Superfine Tungsten Carbide Blazing Rods for End MillsUS$ 50 - 85MOQ: 20 Kilograms
-
Solid Carbide Rod for End MillUS$ 50 - 85MOQ: 20 Kilograms
-
06um Yg12x Ground Solid Tungsten Carbide RodsUS$ 48 - 52MOQ: 1 Kilogram
Tungsten carbide rod are widely used in making end-mill tools.
Grade, performance and applications of carbide rod
Grade |
Density g/cm3 |
T.R.S Mpa |
Hardness HRA |
Grain Size µm |
Performance&Application |
|
YG6X |
14.95 |
2600 |
92.0 |
1.0 |
For making all kinds of carbide rotary cutting tools which are used in cast iron, hot resistant alloy steel, non-ferrous metal and nonmetal. At the same time it can be used for wear resistant parts. |
|
YG8 |
14.70 |
2800 |
90.0 |
1.2 |
For making carbide wear resistant parts, rods and molds, meanwhile it can be used for semifinishing and finishing cutting tool at low speed for cast iron, nonferrous metal, nonmetal material. |
|
YL10.2 |
14.50 |
4000 |
92 |
0.6 |
It is suitable for indexable tool with submicro gain size with wide application. Used for processing of stainless steel, hot resistance steel,Cr, Ti, Ni alloy, synthetic material, non metal material , alloy steel even woods. |
Right grade for the processing material, the tool will perform better and be cost saving. Just kindly inform us your requirement, we will provide differernt solution ways for you.
by extrusion and HIP
by mold and vacuum furnace
Package: Wraped in craft foam then in box, 25kg/carton
Carton size: 360*250*70 mm or 370*210*140 mm
Send Inquiry to This Supplier
You May Also Like
-
Carbon Fiber Used for the Sewage and Water TreatmentNegotiableMOQ: 10 Kilograms
-
Perforated Mesh Walkway Stair Treads Work Platforms Stainless Steel Wire Punching Metal Plank Grating Sheets Custom CuttingUS$ 7 - 60MOQ: 1 Piece
-
Brass Coated Steel Cord for Making Tyre 2*0.30mm Belt/ Steel Conveyor Belt Steel Cord /Tear-Resistant Dipped Steel Cord Fabric for Conveyor BeltUS$ 1 - 200MOQ: 10 Kilometers
-
Chromium Carbide Overlay Bimetallic Seamless Submerged Arc Hardfacing Welding Composite PlateUS$ 125 - 1000MOQ: 1 Square Meter
-
Hastelloy C276 C 22 B2 N Alloy Plate Power Generation Ernicrmo-4 Welding Coils Hastelloy/Monel/Inconel/Incoloy PlatesNegotiableMOQ: 1 Ton
-
Aluminum Foil Lamination Foil 8011/ 1235US$ 3,000 - 3,700MOQ: 20 Tons
-
GrilleNegotiableMOQ: 50 Pieces
-
Tungsten Carbide PlatesUS$ 1 - 2MOQ: 5 Kilograms
-
Re si mg Nodulizer Used in FoundryUS$ 1,230 - 2,000MOQ: 20 Tons
-
Model NO.SY2003-2 Drain Siphon (Desague Sifon)US$ 8 - 10MOQ: 1 Piece
