X(S)N-35/110L Rubber Kneader

Specifications

1. rubber mixer passed the ISO9001.
2.our products are sold worldwide in more than 30 countries and regions.
3 reliable...

Good quality with reasonable price. Easy operation with convenient maintenance. Low labor intensity and low energy consumption.

 

Item Model			X(S)N- 10×32	X(S)N- 20×34	X(S)N- 35×30	X(S)N- 55×30	X(S)N- 75×30	X(S)N- 110×30
Total volume of mixing chamber		L	25	45	75	125	180	250
Working volume of mixing chamber		L	10	20	35	55	75	110
Driving motor power		kw	15	22	55	75	110	185
Tilting motor power		kw	1.1	1.5	2.2	2.2	4	4
Tilting angle		°	140	140	140	140	140	140
Rotational speed of the rotor(front/rear)		r/min	32/23.5	34/28	30/24.5	30/24.5	30/24.5	30/24.5
Pressure of compressed air		Mpa	0.5-0.8	0.5-0.8	0.5-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Capacity of compressed air		m3/min	≥0.5	≥0.7	≥0.9	≥1.0	≥1.0	≥1.5
Pressure of cooling water(rubber mixing)		Mpa	0.2-0.4	0.2-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Pressure of heating steam(plastics mixing)		Mpa	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8
	L	mm	2580	2630	3200	3280	3330	3930
Overall dimensions	W	mm	1300	1520	1900	1930	2620	3000
	H	mm	2280	2550	2950	3070	3340	3660
Weight		kg	3300	4500	6500	7500	10500	14500

1. With completely sealed condition, materials are mixed or plasticated under certain pressure, controllable temperature, which makes high production efficiency and obtains excellentstable quality.

2. Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to bedispersed uniformly.

3. Surface where is contacted with the materials are all platedwith hard chromium and polished, which is corrosion-resistantand wear-resistant.

4. Jacket construction is adopted in parts that surfaces contactwith materials to achieve excellent water-cooling or steamheating effect and fit in with the needs of plastics and rubberprocessing technology.

5. Feeding from back door on the frame(or a separate top door)is convenient for continuous process operation in aproduction line. The mixing chamber is able to turn forward by 140 aroud the front rotors to discharge and is easy for changingpigments and cleaning the chamber.

6. Programmable logic controller(PLC) is adopted in theelectric-control system, which has reliable control function andalarm function, and interlock safety-protection function and itis provided with serial interface of net.

 

 

 

Our motto: The honesty is the root, a promise is a promise.