Contact Platform Support
Help CenterHig Wear Resistance Rigid Colored POM Rod
Related Products
-
Rigid Uv-resistance Easy Machined POM RodUS$ 4 - 8MOQ: 500 Pieces -
Easy to Weld Anti-abrasion White and Black POM SheetUS$ 4 - 8MOQ: 500 Pieces
-
Natural 100% Virgin Material Thermoplastic POM SheetUS$ 4 - 8MOQ: 500 Pieces
-
High Impact Resistace 100% Virgin Material POM SheetUS$ 4 - 8MOQ: 500 Pieces
-
Extruded High-crystalline POM Linear Polymer SheetUS$ 4 - 8MOQ: 500 Pieces
Specifications
POM rod1. Non-Toxic and smell
2. Low coefficient of friction
3.wear resistance
4.high crystalline
Description of POM
POM is a smooth, shiny, hard and dense material. Its color is yellow or white, the thin-walled part is translucent. It is easy to burn from the fire and continued to burn when left the fire. The top of the
flame is yellow, and bottom is blue,there’s melt dripping, and a strong irritant smell of formaldehyde, like fish
stench. POM is a white powder, generally not transparent, stainability, the density is 1.41-1.43 g / cm3, the molding shrinkage is 1.2-3.0% , molding temperature is 170-200 °C, drying conditions is
80-90 °C and 2 hours. POM long-term heat resistance is not high, but it can reach up to 160 °C in short term. It can be used for a long time under the temperature of -40 °C -100 °C temperature range. POM is easily decomposed and its decomposed temperature is 240 degrees.
Decomposition will generate irritating and corrosive gas.So the mold needs to be made by corrosion resistance
materials.
Specifications:
1).Diameter: 3-250mm
2).Available Size: 1000mm
Color:
white, black, brown ect
POM performance
Property |
unit |
copolymerization |
homopolymer |
|
Density |
g/cm3 |
1.425 |
1.41 |
|
Moisture |
% |
0.25 |
0.22 |
|
Tensile |
MPa |
68.6 |
60.37 |
|
Elongation ratio |
% |
|
|
|
Bending strength |
MPa |
96.04 |
89.18 |
|
Compression strength |
Mpa |
123.48 |
109.76 |
|
Impact |
KJ/m |
7.6 |
12.5 |
|
Hardness |
RH |
(M94,R120) |
(M78-80) |
|
Specific heat volume |
J/Kg.k |
/ |
/ |
|
Temperaure of thermal deformation °C 0.45MPa |
°C |
170 |
158 |
|
Volume resistivity |
Ω.m |
6x1014 |
1x1014 |
|
Dielectric Strength(3.2mmThickness) |
Kv/mm |
18.6 |
19.7 |
|
Resistant arc characteristic |
S |
240 |
|
|
Sunlight influence |
slight white |
|
||
Strong-acid influence |
corrode |
|
||
Alkali influence |
some resistance |
|
||
Organic solvent |
fine |
|
||
Send Inquiry to This Supplier
You May Also Like
-
POM Granules DuPont 100P Low Friction Wear‑Resistant for Precision Mechanical PartsUS$ 1.1 - 1.2MOQ: 1 Kilogram
-
Quality PVC Interior Ceiling Panel Modern Design Fireproof Perforated Ceilings Easy Installation With Ceiling GridNegotiableMOQ: 1000 Square Meters
-
Plastic Sheet, Board & PanelNegotiableMOQ: 2500 Pieces
-
Elastomeric Rubber Foam Insulation Sheet for Refrigeration Systems and Thermal PipingNegotiableMOQ: 500 Square Meters
-
Polypropylene Retort Plastic Separator SheetsUS$ 11.50MOQ: 10 Sheets
-
Plastic Tube Steel Security Half Round Fence Post CapsUS$ 0.09 - 0.31MOQ: 1 Piece
-
Retort Separator PP Sheets With Factory PriceNegotiableMOQ: 1
-
Super Clear Transparent Door Colourful PVC Strip Curtain Rolls PVC Door CurtainNegotiableMOQ: 1
-
SANHONG OEM WHOLE SALE Closed Cell pe FoamUS$ 130 - 142MOQ: 28 Cubic Meters
-
20s/6 100% Polyester Silicone Treated Bag Closing Thread 200gNegotiableMOQ: 100 Cartons
