Contact Platform Support
Help CenterFactory Supply Fastener Hot Forging Induction Heating Machine
Related Products
-
200KW Induction Hot Forging Machine for Nuts and Bolts MakingUS$ 1,500 - 10,000MOQ: 1 Set -
Powerful Equipment for Forging Metal,induction Hot Forging MachineUS$ 1,500 - 10,000MOQ: 1 Set
-
Widely Application High Frequency Automobile Parts Induction Quenching MachineUS$ 1,500 - 10,000MOQ: 1 Set
-
High Frequency Bearings Quenching Induction Heating MachineUS$ 1,500 - 10,000MOQ: 1 Set
-
Shaft and Gears Hardening High Frequency Induction Quenching MachineUS$ 1,500 - 10,000MOQ: 1 Set
Factory Supply Fastener hot forging induction heating machine
| Type | LSW-200KW Medium frequency induction heater with IGBT,imported from Germany |
| Input power | 200kw |
| Oscillation Frequency | 2-6khz |
| Cooling Water Flow(host) | 25L/MIN |
| Cooling Water Pressure | 0.3Mpa |
| Input voltage | three phase 380v 50-60hz |
| Function | Heating forging (dr 20-200mm) square/round/flat steel bar, and other workpieces |
Our products advantages:
- High effciency: Using IGBT technology, can heat the workpieces in a short time
- Energy saving: Using the elctric directly,20%-30% power saving, compared with traditional way(gas & oil)
- Easy and safe to use: With all-round indicator lights design,much easier to operate
- Stable in use:Our products has been checked at every level, reducing the rate of failure in a large level.
Products overview:
Zhengzhou Lanshuo Electronics Co.,ltd. is located in Zhengzhou High-tech Development Zone. With more than 10 years experience of manufacturing induction heating furnace, we have developed High Frequency/Medium Frequency/Superaudio Frequency Induction heating machine, induction forging machine, induction quenching and hardening machine,etc.
Our products adopt German original Siemens IGBT power module, Fuji rectifier module, which not only ensures our products an attractive appearance, but also ensures its 20 hours stabel in use. Our products has been widely used in China all over. Besides, we have exported a large amount of our these machines to countries of Russia Federation, South Asia, Southeast Asia.
Any support from us, pls contact me freely
Send Inquiry to This Supplier
You May Also Like
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
Efficient Copper Cable Granulator for Scrap Wire RecyclingNegotiableMOQ: 1 Set
-
Rotary Kiln Plant Design Solution 500 TpdUS$ 2000 - 80000MOQ: 1 Set
-
Noise-reducing Metal Shredder Low-noise Metal Scrap Shredding Machinery for FactoriesNegotiableMOQ: 1 Set
-
Automatic/manual Fluidized Bed Dip Powder Coating Equipment Line for Refrigerator Shelves ProductionUS$ 2000 - 40000MOQ: 1 Set
-
Vertical Scrap Metal Baler With 5.5kW Motor & Safety Lock SystemNegotiableMOQ: 1 Set
-
Automatic Gabion Basket Wire Mesh Forming and Welding MachineNegotiableMOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
-
Made In China JOY 1330/1325 Portable Air Plasma Cutting MachineUS$ 2,000 - 6,900MOQ: 1 Set
-
Automatic Infrared Length Cutting SystemNegotiableMOQ: 1 Set
