Contact Platform Support
Help CenterElectronic Measuring Instrument Detection Tail and Head
Related Products
-
Rapid Response Metal Detector Tracking Hot StripNegotiableMOQ: 1 Set -
Industrial Instrument to Detect Hot Product in a Bar MillNegotiableMOQ: 1 Set
-
Hot Metal Detector for Product Tracking on Tube MillNegotiableMOQ: 1 Set
-
MSE-FMD95 Cut-To-Length Hot Metal DetectorNegotiableMOQ: 1 Set
-
MSE-FMD95 Remote Fiber Hot Metal DetectorNegotiableMOQ: 1 Set
Electronic Measuring Instrument Detection Tail and Head
1. General Description
The MSE-FMD95 utilizes a modular digital Controller in protective mounting Cradle, flexible armored optic leads and interchangeable Remote Lenses. As the controller can be used in conjunction with any lens option one, standard controller can be used throughout the mill. Now there is no need to stock a detector for each requirement. Costly multiple inventory can be replaced with one detector.
The remote lenses incorporate filters to minimize sensitivity to extraneous light. For general tracking, spot lenses are commonly used. Where high accuracy is required or the product deviates about the center line (i.e. Rod Mill) a 1° precision lens (option) should be utilized. This lens is also highly suited to Strip Mills.
2. General Information
Fiber Optic Cables
Flexible Armored Stainless Sheath available in standard lengths from 2 meters to 10 meters in 1 meter lengths; rated 400°C.
Longer optic cables, possible as option.
Remote Lenses
Stainless Tubular Spot:
FOV: 1°or 7°; rated 180°C or 600°C .
High Temperature Quartz Rod:
FOV: 1°; rated 1000°C.
Other shapes of FOV possible as option.
Lens F.O.V. |
Standard: Spot 1° or 7° |
Power Indication |
Blue LED |
% I. R. Signal |
Red / Green / Red LEDs |
Min I.R. Threshold Settings |
Down to 270°C via programming switch |
Supply Voltage |
Standard: 24 VDC ± 10% Option: 80-240 VAC / 50-60Hz |
Power Consumption |
5 W |
|
Operating Temperature of Controller Unit |
-20°C to +55°C |
Output no.1 |
Cradle Relay Output, SPNO, 240VAC, 8A with 20 ms response time. |
Output no.2 |
Reed Relay Output, SPNO, 240VAC, 0.5A with 2 ms response time. |
Output no.3 and 4 |
PNP and NPN Transistor Outputs, N.O., 500 mA, 45 VDC, 2A peak (requires 24VDC supply) |
Send Inquiry to This Supplier
You May Also Like
-
Tracking of Tube Hot Metal Detecting DeviceNegotiableMOQ: 1 Set
-
Hot Metal Detector With Cropping ControlNegotiableMOQ: 1 Set
-
MSE-FMD95 InGaAs Hot Metal Detection MeterNegotiableMOQ: 1 Set
-
Detection After Quenching Hot Metal DetectorNegotiableMOQ: 1 Set
-
MSE Good Industry Hot Metal DetectorNegotiableMOQ: 1 Set
-
Detecting Instrumentation for Tracking Hot ProductNegotiableMOQ: 1 Set
-
MSE-FMD95 Detect of Hot Production With Fiber LensNegotiableMOQ: 1 Set
-
MSE-FMD95 Hot Metal Detection Sensor for Edge DetectionNegotiableMOQ: 1 Set
-
Anti-Dust Remote Fiber Hot Metal DetectorNegotiableMOQ: 1 Set
-
MSE-FMD95 Hot Metal Detection DeviceNegotiableMOQ: 1 Set
