Nylon Agriculture Tires 750 16

Agriculture Tire 

Sturdily constructed from high quality material, our agricultural tyres are sure to last for a long time. These tyres are suitable for on and off the road agricultural applications on tractors, trailers and other large implements. Our agricultural tyres penetrate deep into soil to provide maximum steering control and minimal lateral side-slipping with high center rib. We export our agricultural tires to various locations like Africa, Latin American Countries, Middle East, Central American, Asia, Europe. The range of agricultural tyres is available in the following specifications:

Tire Pattern Specification:

• Specially profiled central rib for deeper penetration and steering control.
• Adequately reinforced rib base for minimum lateral side-slipping.
• Strong and sturdy body piles for longer service durability.
• Cuts and crank resistant tread compound for increased service life.

These tires are offered by us in following specifications:-

Packaging Facility

We have comprehensive wrapping facilities for finished tyres. There are automatic tyre wrapping machines that pack tyres in a systematic way. Systematic packaging of tyres provides complete protection from sunlight, weather effects and foreign materials.

Shipments

We load & ship tyres directly from factory up to both Qingdao Port (In case of FOB-Qingdao Port payment terms) & Upto the relevant global destination ports (In case order is booked on CIF basis).

Future Initiatives

Eastman Group's ADDO INDIA brand covers a comprehensive range of automobile tyres including tyres from truck & passenger car radial sizes. Very soon, the range will be covering a whole range of Bias & Radial tyres.

Eastman Group has acquired 5 acres of land nearby National Capital Region to start the new manufacturing plant. This plant will come via JV with a foreign company to produce high quality and low cost products. The impending JV is intended to gain mutual benefit for both the partners.

Eastman Group plans to upgrade all its production facilities with latest technology used globally. It also aims to increase the production capacity of its manufacturing plants.

Our Approach

To provide superior quality tyres and its spares, highly skilled staff uses ultra modern technology in manufacturing and quality testing procedures. To Meet the quality compliance of international quality standards, our products go through many technical processes as given below: 

TENSTILE TESTER

Machine used for testing physical properties such as Young Modulus, Tensile strength and elongation at break.

RHEOMETERS

Instrument used for testing the quality of rubber materials and describing the curing & processing characteristics of elastomers.

RAW TYRE / GREEN TYRE HANDLING

Best System for handling green tyres that prevents green tyres from any kind of deformation.

CURING LINE FOR RADIAL TRUCK TYRES 

Dual cavity segmental moulds with auto loading and auto control system. 

FINISHED TYRES X-RAY MACHINE 

Each tyre is passed through X-ray to detect internal tyre defects like steel wire dislocation and foreign materials.

PLUNGER TESTING 

Testing machine used to check the strength of tyres. 

ENDURANCE TESTER 

Endurance tester or drum tester to check tyre's performance, quality and life.

Eastman Industries Limited is one of the leading manufacturers and exporters of a wide range of tires under the brand name ADDO INDIA. It is a subsidiary of Eastman group of Industries. Promoted by Mr. J. R. Singal, the group is having worldwide operations with its facilities at India and China.

Furthermore, its products and services have won accolades from the patrons in markets of South America, Central America, Mediterranean Europe, Middle-East and other parts of world. 

In the year 1982, the Eastman Group becomes multinational by establishing an outsourcing network office at Hangzhou, China. This assists it in sourcing high quality tyres from China, apart from its own manufactured tyres from Eastman Industries. All the tires ranges are in-compliance to various quality standards viz. CCC, ISO, E-MARK, DOT and SON. We are engaged in exporting of tires to Countries like Africa, China, Latin American Countries, Russia, Algeria, Costa Rica, Jamaica, Mauritious, Iran

If tyres are kept properly inflated and rotated on a regular basis than they would provide trouble-free service mile after mile. Here are a enlistment of FAQs that will tell requisite knowledge about tyre maintenance.

What is the importance of proper inflation?
Proper inflation is the single most important factor in tyre care. It is strongly recommended to follow the tyre inflation specifications recommended by the vehicle manufacturers. The recommended tyre inflation is provided in owner's manual and posted on some places in vehicle. Tyre inflation should be checked when tyres are cold or has been driven less than a mile. Check and adjust tyre inflation in every few weeks. 

What is the importance of rotation?
Regular and proper tyre rotation ensures uniform wear to all the tyres on a vehicle. It is recommended that tyres should be rotated in a "modified X" pattern. In this pattern, only those tyres are crossed to the opposite side of the vehicle, which are being moved to the drive axle. Rest of the tyres are moved from the drive axle to the free rolling axle. This method provides even and uniform tread wear pattern to all the four tyres. Owner's manual describes rotation recommendations for a vehicles. In case of no intimation of rotation period, tyres should be rotated every after 6,000 to 8,000 miles.

How long original equipment tyres last?
It is not possible to state any written mileage promise on any type of tyres as original equipment. As it depends largely on several factors such as styles, construction features, vehicle's applications, geographical conditions, driving habits etc. However, If maintained properly, tyres can run for longer without any difficulties. In addition, any tyre wear concern should be put forth to the authorized distributor or retailer for evaluation.

What is alignment?
A vehicle is said to be properly aligned when the tire and wheel assemblies are running straight. Proper alignment is necessary for precise steering. Uneven front/rear tire wear in vehicle's steering response indicate misalignment. The alignment can affect tyre mileage and performance.

What is vibration?
Vibration indicates a problem in the car that needs attention. The tyres, suspension system and steering system are the possible cause of vibration. The vibration can lead to excessive tire and suspension wear, which can be dangerous in driving.

Should tyres get replaced with the same size tyres?
Yes, always. It is advised to choose a tyre having similar size as original tyres have. Smaller size tyres should never be selected for tyre replacement. In other cases, tyres can be replaced as per the approved options recommended by the vehicle manufacturers.

Should I provide special attention to my new tyres?
Yes, as new tyres may probably provide different feel from the replaced tyres. It takes a little time to get familiar with the performance and handling of new tyres. Special attention should be provided while braking, accelerating, driving in the rain etc. as these times clearly indicates the noticeable differences.

How do I know about the requirement of new tyres?
Eastman offers its tyres with tread wear indicator bars molded into the tread. Once the tread start showing the solid rubber bars across the tyre width, it is the time to replace the tyre. In addition, visual appearance also provides clear idea about the tyre replacement.

Why do tyres need to be balanced?
It is important to have properly balanced tyres for comfortable driving and long tyre life. Unbalanced tyres cause vibration, premature tyre wear as well as wear to vehicle's suspension. Tyres should be balanced when mounting or remounting on wheels.rmal style='margin-bottom:0in;margin-bottom:.0001pt;line-height: 13.5pt;vertical-align:baseline'> 

PLUNGER TESTING 

Testing machine used to check the strength of tyres. 

ENDURANCE TESTER 

Endurance tester or drum tester to check tyre's performance, quality and life.