Contact Platform Support
Help CenterDM5180 Base Ornamental Chinese Pine Wood Moulding
Related Products
-
Lambs Tongue Ornamental Chinese Pine Wood MouldingUS$ 400 - 650MOQ: 12 Cubic Meters -
LWM47 Ornamental Chinese Pine Wood MouldingUS$ 400 - 650MOQ: 12 Cubic Meters
-
MD8002 Ornamental Chinese Pine Wood MouldingUS$ 400 - 650MOQ: 12 Cubic Meters
-
BB-40 Ornamental Chinese Pine Wood MouldingUS$ 400 - 650MOQ: 12 Cubic Meters
-
QR Ornamental Chinese Pine Wood MouldingUS$ 400 - 650MOQ: 12 Cubic Meters
wood moulding , gessoing and priming, fireproof, waterproof, Surface uniform , smooth, no color different.
| Product name | DM5180 base ornamental chinese pine wood moulding |
| Size | 13.5mm×133.6mm |
| Color | White |
| Application | Indoor decoration |
| Discription | moulding,Gessoing and priming, waterproof, Surface uniform ,smooth, no color different. Except drawing special requirements, tolerances are that, Width ±0.4mm , Thickness ±0.4mm, Length ±1mm, Crook ±1.4mm/m |
| Package | Palletized (fumigation applied), plastic foil wraped. 46-52 cubic meters in one 40' cargo. Customized package. |
| Material | Radiata pine, Chinese fir |
| Coating | Gessoing and priming |
| Delivery | 35days after order received |
| Certificate | FSC |
| Payment | L/C, T/T |
Gessoing product procedure
moulding packaging
moulding loading
each moulding order we do quality report and testing for the customer
moulding testing
moulding Factory show:
Wood moulding mainly problem:
why wood moulding easy crooking?
The wood timber need kiln dry, kiln drying need note: 1. timber must be stacked up evenly with spacers, spacers must be the same size. 2. There must be spacers at 3" towards ends of each piece of timber. 3. leave min space between each cart of timber to let air circulate evenly 4. Chinese fir timber must be sit in Kiln for 7-8 days, and Radiata Pine timber must be sit in kiln for 10 days, at 100% humidity, average 80 centigrade degrees. 5. MC of kiln dried timber for F/J is from 8-11%. 6. MC of each pc shall vary in 3%. 7. Never below 6% or above 14% .7. Probes must be put at 6 corners in kiln. 8. there 4-5 spots shall be measured for each sample piece.9.check the MC and fill in the form ( samples need to be picked from each corner of kiln) .10. inside stress test, pick up few samples, sawing some fingers on each sample like 1.5" long, and air samples for 1-2 days, if fingers moved, means the inside stress is not properly eliminated. need adjust the drying procedure.
After kiln drying the wood timber need acclimatize, acclimztizing timber need note: 1. KD timber must be put at a chamber with good air-flowing and roofing. 2. Chinese fir acclimatization duration is 7-10 days, Radiata pine acclimatization duration is 10-15 days. 3. can't expose the KD timber to rain, snow etc. 4. can't spray water or other liquid on KD lumber.
when we make the product if the board width above 90mm, we would better E/G the board.
if we do the wood moulding as above, the products would not crook.
Why wood moulding peeling?
in order to cover some knots and defects of China fir, and also for having a better smoother finishing, we do two coat of thin gessoing, but we need note: 1. when mixing gesso and gesso glue, can't add water or other kind of glue, therefore the viscosity and waterproofing will be lowered. 2. Gesso and glue must evenly mixed with good flowing. 3. film thickness of gesso coat is less than 15um. 4. mesh of gesso is from 400-600, lower than 400 mesh will have rough finishing. 5. the temperature of dryer for drying gesso coat is at 50-70 celcius, each piece must stay at least 15 minutes in the dryer tunnel.6. after drying in dryer, product shall sit for 24 hours for next step's processing. 7. exterior product need use F series gesso glue.
after sanding we do the second gessoing, the coat is less than 15um too. and need sit for 24 hours for nex step's processing.
We specialized in coated mouldings including indoor and outdoor decorative mouldings, wellcome to check our full catelogue.
Send Inquiry to This Supplier
You May Also Like
-
New Products Stone Pvc Composite UV Panel Hollow Pvc Door CasingUS$ 2 - 25MOQ: 100 Meters
-
3d Mould Cnc Machining Prototype Die Casting MoldUS$ 1,000 - 20,000MOQ: 1 Set
-
Unpainted Wood BaseboardUS$ 0.05 - 5MOQ: 1000 Pieces
-
China High Quality Spare Parts Plastic Injection MouldingUS$ 0.01 - 100MOQ: 50 Pieces
-
Mould for AAC PlantNegotiableMOQ: 5 Sets
-
CORNER MOULDINGUS$ 500 - 980MOQ: 30 Cubic Meters
-
Many Kinds of Rubber Stamp Mould Concrete Stamp MatsUS$ 1 - 9MOQ: 100 Kilograms
-
Sell Aluminium Honeycomb PanelsNegotiableMOQ: 1
-
2015 Fashion and New Decorative Frame CornersUS$ 0.5 - 2MOQ: 1000 Pieces
-
BaseboardUS$ 3 - 4.5MOQ: 400 Kilograms
