Contact Platform Support
Help CenterNew Products Intelligent Remote Control Switch and Touch Switch Touch Light Switch for Hotel/home Room Automation
Related Products
-
New Products Smart Life Used Z-wave Touch Screen Wall Switch 3 Gang Remote and Touch Light Switch for Hotel/home Room AutomationUS$ 160 - 250MOQ: 1 Set -
4 Gang Touch Screen Light Control SwitchUS$ 160 - 250MOQ: 1 Set
-
4 Gang Touch Screen Dimmer Light Switch Touch Wall SwitchUS$ 160 - 250MOQ: 1 Set
-
4 Gang 12v Touch Sensor Switch Touch Wall SwitchUS$ 160 - 250MOQ: 1 Set
-
4 Gang Electric Switch Touch ScreenUS$ 160 - 250MOQ: 1 Set
new products intelligent remote control switch and touch switch touch light switch for hotel/home room automation
This manual provides you the detailed technical information about the Switch Actuators, not only the installation and programming details, but also the usage explanation in actual application. They can be installed in the distribution boards on 35mm mounting rails according to EN60715.
These switch actuators can be used to control the switch loads, such as:
- intelligent switch
- Lighting
- Heating control
- Signal devices
The working current: Max 12 ma
Power consumption: Max250mA
Output: 4
Rated current, ac 250 vac Hz16A (50 ~ 60)
Temperature range: - 5 ℃ ~ 55 ℃
Installation method: standard 35 mmdin guide installation
The switch actuators are the modular installation devices, with 8 and 12 outputs for selection, using KNX connection terminals to connect to the system. The switch actuators need to connect an extra 230V AC power supply and provide to 4 outputs. It is able to use the Engineering Tool Software ETS (ETS2 v1.3 or later) with a VD2/VD3 file to allocate the physical address and set the parameters.
If the 230V AC power supply is not connected, all LEDs are flashing for indicating output state on the device.
It is able to switch from 4 to 8 independent electrical AC loads or three-phase loads and 4 electrical AC loads with the same phase of the 230V AC power supply by the switch actuators with maximum output of 6A per output and manual switch, as well as visible switching status via LED indication.
There are same following programming functions for each output:
w time function: on/off delay
w staircase function with the warning and adjustable staircase lighting time
w scene, preset control: 8bit/1bit
w logic operation: AND, OR, XOR, gate function
w status response
w forced operation and safe function
w threshold function setup
w control of electro thermal valve function
w manual operation switch
w indication of switch status (contact position)
Shipping way:
Send Inquiry to This Supplier
You May Also Like
-
Wireless Remote Controller With LCD Screen for Cable Laying EquipmentUS$ 40 - 80MOQ: 1 Combo
-
RF Remote ControlNegotiableMOQ: 2700 Pieces
-
TAIYITO Video Intercom Smarthome Intelligent Home Digital Indoor Gateway(7")US$ 59 - 99MOQ: 1 Set
-
GSM SMS RTU Controller With 4DIN 4DO RTU5010US$ 1 - 10MOQ: 1 Set
-
Switch Remote Control Switch(LW30-100)US$ 10.5 - 60MOQ: 50 Pieces
-
KeyfinderNegotiableMOQ: 5000 Pieces
-
Innovative Product Voice Remote ControlNegotiableMOQ: 10 Pieces
-
2014 Hot Sale Mobile Phone Monopod.wireless Mobile Phone Monopod..camera MonopodUS$ 1 - 10MOQ: 100 Pieces
-
Bluetooth Universal Steering Wheel Remote Control Car Learning for Car Audio Video DVD GPSUS$ 1 - 100MOQ: 100 Pieces
-
Hot Sale Black TV ControllerUS$ 0.5 - 0.6MOQ: 1000 Pieces