Oval Ring Joint Gaskets

Specifications

Oval Ring Joint Gaskets .
1) High Quality .
2) Resonable Price .
3) On Time Delivery .

                                                               

                                                                            Ring type Joint Gaskets 

Ring type Joint Gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. By applying pressure on the seal interface through bolt force, the softer metal of the gasket flows into the microfine structure of the harder flange material, creating a very tight and efficient seal,.

CROSS SECTION
Oval Type

The contact face is in oval shape. It provides a high reliabililty seal. These gaskets comply with ASME B-16.20,.
 

 

Octagonal Type
More accurate in dimensions and surface finish than oval type because it consists of straight surfaces only. A Higher torque load is required to flow the gasket material into imperfections of the flange facings.These gaskets comply with ASME B-16.20,.

BX type
Designed to API 6A. Interchangeable with the oval and octagonal series of identical reference numbers, and used in the same flange grooves,.

RX type
Designed to API 6A for use with grooved flanges for special applications involving high pressures from 5,000 to 15,000 psi. IX type
 

AX type

 

SIZES

We manufacture Ring type joint gaskets of all sizes and shapes.,

FLANGE STANDARDS
Ring joint gasket can be manufactured in accordance with all relevant gasket standards and specifications to suit the following flange designations: