Contact Platform Support
Help CenterChina Hot Sale Cheap Price Fireplace Igniter Manufacturer
Related Products
-
Hot Sale Energy-efficient Biomass Pellet BurnerUS$ 8 - 18MOQ: 100 Sets -
2014 China Cheap Price Hot Sale Ignition for Pellet StoveNegotiableMOQ: 10 Pieces
-
Small Quantity Acceptable Wood Pellet Stove Igniter for Pin WholesaleNegotiableMOQ: 10 Pieces
-
230V 170W Biomass Igniter for Wood Pellet BoilerNegotiableMOQ: 10 Pieces
-
High Quality Cheap Price Piezo Igniter for Biomass BoilerNegotiableMOQ: 10 Pieces
Specifications
1. Fireplace Igniter2. High temp. and power
3.Fast heating up
4.Long life
5.Meet Rohs
Xiamen Green Way is your best choice for high level quality and best price fireplace igniter
manufacturer with the advantages of long service time, fast heating rate, energy-efficient and
eco-friendly.
Characteristic
1.High temperature-resistance ceramic heating element which can reach a permanent working temperature above 750°C
2.Energy saving, super fast heating-up
3.Air can through and around inside and outside of the heater.
Heat can be transfered from both inside and ouside of the heating element.
4.Electrically oxidation and corrosion-resistant
5.High load-bearing capacity(thermal shock resistance, cycles)
5.Customization the igniters according to customers’ specific requirement.
Application
One special application area for Green Way’s high temperature ceramic igniters is in heating
systems that use solid fuels such as wood pellets as energy source. The challenge here is to
ignite the biomass in a very short time while retaining very low emission values. This can be
perfectly achieved by Green Way’s hot surface ceramic igniters.
Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed
by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depend-
ing on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions!
Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.
Mass customization is available.
1 |
Part No. |
G9010-3 |
2 |
Usage |
Fireplace Igniter |
3 |
Working Voltage |
230VAC |
4 |
Power |
150-200 (W) |
5 |
Dimension |
Standard Dimension |
6 |
Cable |
500mm cable or accordingly |
7 |
Advantages |
(1)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket
(2)Air can flow through and around inside and outside of heater
(3)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C
(4)Lifetime up to 100,000 heating cycles, depending on operating conditions
(5)Oxidation and corrosion-resistant
(6)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures – the ideal ignition blower!
|
Send Inquiry to This Supplier
You May Also Like
-
Industrial Diesel/kerosene Oil HeaterUS$ 220.00 - 250.00MOQ: 1 Set
-
Industrial Diesel/kerosene Oil HeaterNegotiableMOQ: 1
-
220V HVAC 15mm Width 430/450/480/530/550mm Band Heater Silicon Heater for Compressor Silicone Rubber HeatersNegotiableMOQ: 1
-
2014 Newest Solar Thermal Heaters HG 140US$ 1 - 50MOQ: 100 Units
-
Burner Pellet Used Offer 600,000kcal/hUS$ 1,000 - 78,000,000MOQ: 1 Set
-
3Kw Industrial Space Heater 3000W Thermostat Controlled Workshop Cylinder Fan Heater 450051US$ 23 - 40MOQ: 100 Pieces
-
Temperature Melting Stick for Welding Preheat EquipmentUS$ 1,000 - 2,000MOQ: 5 Pieces
-
Huakui Electrical Heater Outer Sleeve HeaterUS$ 15 - 35MOQ: 1 Set
-
2014 New Diesel Kerosene Air HeaterUS$ 140 - 160MOQ: 100 Sets
-
Cylone Preheater Before Clinker Rotary Kiln in Cement PlantUS$ 10,000 - 20,000MOQ: 1 Set
