Contact Platform Support
Help CenterWholesale High Quality Wood Burner Ignitor for Industrial Used
Related Products
-
230V Ceramic Ignition Device for Igniting Solid Fuel With Proctective TubeNegotiableMOQ: 100 Pieces -
2014 Hot Sale 150W Pellet Lighter Ignition for Biomass FireplaceNegotiableMOQ: 10 Pieces
-
High Quality China Supply Cheap Wood Pellet Lighter for Pellet StoveNegotiableMOQ: 10 Pieces
-
230V 80ohm Igniter for Pellet BurnerNegotiableMOQ: 10 Pieces
-
Stock! Wood Pellet Ignition for BoilerNegotiableMOQ: 10 Pieces
Specifications
1.Wood Burner Ignitor2. Factory price
3.Heating Up to 800C in 20s
4.Long life
5.Meet Rohs
HIGHLY DURABLE AND ENERGY-EFFICIENT XIAMEN GREEN WAY’S IGNITER
---ceramic hot surface wood burner ignitors for the sake of environment.
Xiamen Green Way is your best choice for high level quality and best price wood burner ignitor for industial used burner with the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.
Characteristic
1.High temperature-resistance ceramic heating element which can reach a permanent working temperature
above 750°C
2.Energy saving, super fast heating-up
3.Air can through and around inside and outside of the heater.
Heat can be transfered from both inside and ouside of the heating element.
4.Electrically oxidation and corrosion-resistant
5.High load-bearing capacity(thermal shock resistance, cycles)
5.Customization the igniters according to customers’ specific requirement.
Application
One special application area for Green Way’s high temperature ceramic igniters is in heating systems that
use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very
short time while retaining very low emission values. This can be perfectly achieved by Green Way’s hot surface
ceramic igniters.
Ceramic hot surface wood burner ignitors for industrial used burner need only approx. 1/10 of the energy of
that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200Watt. Depending
on the positioningof the ignition element in the boiler, the ignition time of approx. 60 seconds is
extremely short. This also means minimal emissions!
Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.
Mass customization is available.
1 |
Part No. |
G78105-33 |
2 |
Usage |
Wood Burner ignitor |
3 |
Working Voltage |
230VAC |
4 |
Power |
(150 -250) W |
5 |
Dimension of product |
Standard Dimension |
6 |
Cable |
accordingly |
7 |
Advantages |
(1)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket
(2)Air can flow through and around inside and outside of heater
(3)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C
(4)Lifetime up to 100,000 heating cycles, depending on operating conditions
(5)Oxidation and corrosion-resistant
(6)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures – the ideal ignition blower!
(7)Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. |
Send Inquiry to This Supplier
You May Also Like
-
Ceramic InsulatorNegotiableMOQ: 2000 Pieces
-
Steatite Ceramic PipeUS$ 0.05 - 10MOQ: 1000 Pieces
-
Piezoelectric Ceramics Disc YL090E-20US$ 0.01 - 0.1MOQ: 5000 Pieces
-
Steatite Ceramics With High QualityUS$ 1.70 - 2.00MOQ: 2000 Pieces
-
Cordierite Mullite Ceramic Insulators for Electric HeaterUS$ 0.99 - 9.99MOQ: 10 Pieces
-
Alumina Ceramic Snail Wire Guides(ceramic Pigtail Coil )NegotiableMOQ: 100 Pieces
-
Aluminum Oxide Industrial Ceramics, Insulation, Shaped Ceramic Heads, Wear-resistant Ceramics, Ceramic Accessories, Electronic CeramicsNegotiableMOQ: 1000 Pieces
-
Piezoelectric Pzt Element Ultrasonic Cleaning Transducer Material Lead Zirconate Titanate Ceramic Ring 25x10x3mmUS$ 3.5 - 4MOQ: 50 Pieces
-
Boron Nitride CeramicUS$ 20 - 200MOQ: 1 Piece
-
Pulp Mold Products Packaging InsertNegotiableMOQ: 1 Piece
