Galvanized Steel Welded Brick Mesh From Anping
Specifications
Welded brick mesh1.Material: galvanized
2.Opening:1/4"~4"
3.Width:0.3m~2.5m
4.ISO9001
Galvanized Steel Welded Brick Mesh from Anping
Reinforced brickwork is preferable to un-reinforced brickwork in all types of buildings. When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground).
Advantages:
It is expanded steel mesh with continuity of steel.
It has no joints, welds or interweaving to fail under stress.
The mesh is anchored immovably so that the reinforcement cannot slip under tension.
This is the only type of brickwork reinforcement to give such a unique combination of all these
Technical: expanded and welded
Specification:
Ref No |
Coil Width & Length |
Thickness (mm) |
Material |
BRM 1 (GI) - 21/2" x 72' |
65mm x 22m |
0.35 |
Pre-galvanized steel |
BRM 1 (GI) - 4" x 72' |
100mm x 22m |
0.35 |
Pre-galvanized steel |
BRM 2 (GI) - 21/2" x 80' |
65mm x 24.4m |
0.50 |
Pre-galvanized steel |
BRM 2 (GI) - 41/2 x 80' |
113mm x 24.4m |
0.50 |
Pre-galvanized steel |

Send Inquiry to This Supplier
You May Also Like
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
Modern 25mm EPS Polyurethane Fireproof Roofing Sheets Prefabricated House Price Exterior Cold Room Workshop Kitchen DiningNegotiableMOQ: 100 Square Meters
-
SOURCE POLYURETHANE SANDWICH PANEL FactoryNegotiableMOQ: 100 Pieces
-
Wholesale 27in X 97in Paper-back Diamond Metal Lath Expanded Stucco Metal Lath for Cement Plaster WallsUS$ 1.7 - 3.2MOQ: 1 Piece
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
-
Unitized Frameless Glass Curtain WallUS$ 1 - 260MOQ: 200 Square Meters
-
Stainless Steel Stain Chrome Finished 36 Sheet Metal GaugeUS$ 1 - 30MOQ: 600 Pieces
-
Factory Direct Sale Steel Stand Coupler Scaffolding in Large StockUS$ 4 - 6MOQ: 5000 Pieces
-
ISO Access Cover Supplier Custom Made in Zhejiang China With 30 Years ExperienceUS$ 0.5 - 19.9MOQ: 500 Pieces



