Contact Platform Support
Help CenterPolypropylene Wound Filter Cartridge 10 Inch 5 Micron for Water Treatment
Product Spotlights
Related Products
-
20 Inch 1 Micron Wound Filter Cartridge With 304 Stainless Steel Core for Water TreatmentNegotiableMOQ: 1 Piece -
Cotton Wound Filter Cartridge 30 Inch 1 Micron Nominal Filtration for Water TreatmentNegotiableMOQ: 1 Piece
-
304 Stainless Steel Wound Filter Cartridge, 5 Micron, 10 Inch, 200 PSI, 200°F MaxNegotiableMOQ: 1 Piece
-
Wound Filter Cartridge for Water Treatment, 5 Micron, 10 Inch, Effective Sediment RemovalNegotiableMOQ: 1 Piece
-
316L Wound Filter Cartridge, 0.5 Micron, 40 Inch, 300 PSI, Sanitary Tri-Clamp EndsNegotiableMOQ: 1 Piece
Anping County Boli Hardware Wiremesh Products Factory (established in 1998) proudly presents our high-quality Polypropylene Wound Filter Cartridge 10 inch 5 Micron, designed for efficient water treatment and sediment removal. As a manufacturer with over two decades of experience, we combine precision engineering with cost-effective production to deliver reliable filtration solutions. This cartridge offers deep depth filtration, capturing particles down to 5 microns while maintaining high flow rates and long service life, making it ideal for residential, commercial, and industrial water systems.
Our wound filter cartridges are constructed from 100% virgin polypropylene fibers, wound in a controlled pattern around a central core. The gradient density structure ensures that larger particles are trapped on the outer layers, while finer particles are captured deeper inside, maximizing dirt-holding capacity and reducing frequent replacements. Each cartridge is rigorously tested for consistent micron rating and structural integrity.
Key Features & Benefits
- High Filtration Efficiency: 5 micron nominal rating removes sand, silt, rust, and other suspended solids, protecting downstream equipment.
- Depth Filtration Design: Multi-layer winding captures contaminants throughout the cartridge, not just on the surface, extending filter life.
- Chemical Compatibility: Polypropylene material resists a wide range of chemicals, suitable for various water types including acidic or alkaline.
- Low Pressure Drop: Optimized winding density ensures minimal flow resistance, saving energy in pumping systems.
- Thermal & Mechanical Stability: Operates reliably up to 60°C (140°F) and 4 bar (58 psi) without deformation.
- Customizable Core: Available with polypropylene or stainless steel core to meet specific application needs.
- Easy Installation: Standard 10-inch size fits most housings with 2.5-inch outer diameter and 1.0-inch inner diameter.
- Cost-Effective: Competitive pricing without compromising quality, backed by our factory-direct manufacturing.
Technical Specifications
| Parameter | Value |
| Material | 100% Virgin Polypropylene (PP) |
| Length | 10 inch (254 mm) |
| Outer Diameter | 2.5 inch (63 mm) |
| Inner Diameter | 1.0 inch (28 mm) |
| Micron Rating | 5 micron (nominal) |
| Max Operating Temperature | 60°C (140°F) |
| Max Operating Pressure | 4 bar (58 psi) |
| Flow Rate (typical) | Up to 10 L/min (2.6 GPM) at 2 bar |
| Core Options | Polypropylene or Stainless Steel (304/316) |
Typical Applications: Our 10-inch 5 micron polypropylene wound filter cartridges are widely used in:
- Residential water filtration systems (under-sink, whole house)
- Commercial water coolers and vending machines
- Industrial pre-filtration for reverse osmosis (RO) systems
- Cooling tower water treatment
- Food and beverage processing
- Irrigation and agricultural water filtering
Why Choose Boli Hardware Wiremesh Products Factory?
As a manufacturer since 1998, we have accumulated extensive expertise in filtration media production. Our annual export value of US$5 Million – US$10 Million reflects the trust and satisfaction of global customers. We ship from major Chinese ports including Tianjin, Qingdao, and Shanghai, ensuring timely delivery to markets across North America, South America, Europe, Asia, Africa, and Oceania. Every cartridge undergoes strict quality control checks to ensure consistent performance. We offer flexible packaging options and OEM/ODM services to meet your specific requirements.
By choosing our polypropylene wound filter cartridge, you invest in a product that balances superior filtration performance with long service life, reducing total cost of ownership. Our experienced team provides technical support and after-sales service to ensure your satisfaction. Contact us today for competitive pricing and customized solutions.
Frequently Asked Questions (FAQ)
Q1: What is the difference between 5 micron and 10 micron cartridges?
A 5 micron cartridge captures smaller particles than 10 micron, offering finer filtration. It is suitable for applications requiring higher clarity, such as RO pre-filtration. The 5 micron rating means particles larger than 5 microns are trapped, while 10 micron allows slightly larger particles to pass through.
Q2: Can this cartridge be used for hot water?
Yes, but the maximum operating temperature is 60°C (140°F). For continuous hot water applications above this temperature, please consult with our technical team for alternative materials.
Q3: Does the cartridge come with an O-ring or gasket?
The cartridge itself does not include an O-ring; it is designed to fit standard filter housings with a built-in O-ring seal. However, we can supply O-rings separately upon request.
Q4: How often should I replace the filter cartridge?
Replacement frequency depends on water quality and usage. Typically, for residential use, replacement every 3–6 months is recommended. For industrial applications, monitoring pressure drop helps determine when to change the cartridge.
Q5: Is the cartridge made of food-grade polypropylene?
Yes, we use virgin polypropylene that meets food-grade standards. It is safe for drinking water filtration. If you require a specific certification, please contact us for documentation.
Q6: Can I get custom lengths or micron ratings?
Absolutely. We offer customization for length (e.g., 20 inch, 30 inch), micron ratings (1, 10, 25, 50 micron, etc.), and core materials. Minimum order quantities may apply.
Q7: What is the typical shelf life of these cartridges?
When stored in a cool, dry place away from direct sunlight, polypropylene wound cartridges can be stored for up to 3 years without degradation. Please avoid exposure to extreme temperatures or chemicals.
Q8: Do you provide samples before bulk order?
Yes, we offer samples for quality evaluation. Sample cost is negotiable, and shipping is at customer's expense. For bulk orders, we can deduct the sample cost from the final invoice.
Looking for a reliable filtration partner? With 25+ years of manufacturing experience, global exports exceeding US$5M annually, and a dedicated team, Anping County Boli Hardware Wiremesh Products Factory is your trusted source. Request a quote or sample today to experience the difference.
Send Inquiry to This Supplier
You May Also Like
-
Wound Filter Cartridge for Pharmaceutical Filtration, 0.5 Micron, 316L, Sanitary DesignNegotiableMOQ: 1 Piece
-
Wound Filter Cartridge, 20 Micron, 30 Inch, 4.5 Inch OD, 1 Inch ID, 80°C MaxNegotiableMOQ: 1 Piece
-
Wound Filter Cartridge With 1 Year Warranty, Mill Test Report, Standard CompliantNegotiableMOQ: 1 Piece
-
Wound Filter Cartridge, Factory Test Certificate, 2-Year Warranty, Reliable PerformanceNegotiableMOQ: 1 Piece
-
Wound Filter Cartridge, 50 Micron, 10 Inch, 222 O-Ring, BPA Free, GMP StandardNegotiableMOQ: 1 Piece
-
Polypropylene Wound Filter Cartridge, 1 Micron Absolute, 20 Inch, 150 PSI, Standard CompliantNegotiableMOQ: 1 Piece
-
Wound Filter Cartridge, 100 Micron, 20 Inch, 1.5 Inch NPT, Heavy Duty SedimentNegotiableMOQ: 1 Piece
-
304 Stainless Steel Wound Filter Cartridge 5 Micron 20-Inch Length 1.5-Inch ODNegotiableMOQ: 1 Piece
-
Wound Depth Filter Cartridge 5 Micron 10-Inch 70°C Max Temp Polyester Fiber With SS MeshNegotiableMOQ: 1 Piece
-
Polypropylene Wound Filter Cartridge 10 Micron 2.5-Inch x 10-Inch 225°F Max TemperatureNegotiableMOQ: 1 Piece
