Contact Platform Support
Help CenterHART Differential Pressure Level Transmitter for Chemical Storage Tan
Product Spotlights
2. Integrated capacitive sensing module, excellent static‑pressure resistance, stable performance under tank working pressure.
3. Built‑in local LCD display for on‑site reading of level and differential pressure, convenient for inspection and commissioning.
Related Products
-
Differential Pressure Level Transducer for Pressurized Chemical TankNegotiableMOQ: 10 Units -
Smart Differential Pressure TransmitterNegotiableMOQ: 10 Units
-
Chemical Explosion-proof Differential Pressure Level TransmitterNegotiableMOQ: 10 Units
-
Closed Vessel Differential Pressure Level SensorNegotiableMOQ: 10 Units
-
Differential Pressure Level Transmitter for Pressurized Storage TankNegotiableMOQ: 10 Units
1.Product Overview
The smart differential pressure transmitter is specifically designed for precise measurement of differential pressure between two pressure points. It converts differential pressure values into standard industrial signals for applications such as flow calculation, liquid level monitoring, filter condition monitoring, and pipeline leak detection.
Compared to traditional differential pressure transmitters, the intelligent model incorporates advanced features such as self-diagnostics, remote calibration, digital communication, and intelligent compensation. These capabilities significantly enhance measurement accuracy, stability, and reliability while reducing maintenance costs, making it well-suited for complex and dynamic industrial environments.
2.Product Advantages
Utilizes second-generation monocrystalline silicon composite sensors or capacitive sensors with optimized diaphragm structures, achieving measurement accuracy of ±0.075% while maintaining precise response in low differential pressure scenarios;
Long-term stability exceeds 0.1%/year, reducing calibration frequency;
Robust environmental adaptability with IP67 protection rating and electromagnetic interference resistance;
Supports 4–20mA current signal output with superimposed HART digital signal, offering strong EMI resistance; select models can be customized with LoRaWAN communication;
Enables remote parameter setting and calibration via HART, Modbus, and other protocols, eliminating on-site operation;
Built-in EEPROM non-volatile memory retains calibration data after power loss, with raw data recovery capability;
Maximum turndown ratio of 100:1 covers measurement requirements from micro-differential pressure (0-1kPa) to high-differential pressure (0-10MPa);
Integrated temperature and pressure nonlinearity compensation algorithms eliminate environmental impacts on measurements;
Monitors sensor, circuit, and communication status, triggering alarms within 100 milliseconds and storing fault information;
Isolation diaphragms made of 316L stainless steel, Hastelloy, or tantalum for corrosive media applications;
Stores critical measurement data and event logs for traceability and analysis.
Send Inquiry to This Supplier
You May Also Like
-
Differential Pressure Level Gauge for Sealed Pressure VesselNegotiableMOQ: 10 Units
-
HART 4‑20mA Differential Pressure Level Transmitter for Pressure Tank Level MeasurementNegotiableMOQ: 10 Units
-
Smart DP Level Transmitter for Closed Pressurized Storage TankNegotiableMOQ: 10 Units
-
Integral Magnetic Flowmeter With LCD Display Flange ConnectionNegotiableMOQ: 5 Units
-
Low Power Solar Solenoid Valve for Orchard GreenhouseNegotiableMOQ: 5 Units
-
Vortex Flow Meter With Temperature Pressure Compensation for SteamNegotiableMOQ: 5 Units
-
Industrial 2088 Type RTD Temperature Transmitter 4‑20mA OptionalNegotiableMOQ: 10 Units
-
Anti‑clog Single Flange Level Transmitter for Crystallizing MediumNegotiableMOQ: 10 Units
-
Battery‑powered IoT Manhole Safety Detector for Municipal Pipe NetworkNegotiableMOQ: 10 Units
-
Anti‑magnetic Tamper Water Meter for Municipal Water Supply ProjectNegotiableMOQ: 10 Units
