Contact Platform Support
Help Center9-Section ABS Locker FLC06 for Clinic Staff — Easy-Clean Surfaces, CE Certified, No Rust
Product Spotlights
Related Products
-
9-Cube ABS Locker FLC09 for Uni Dorms — Stackable Design Saves Floor Space in Shared RoomsUS$ 20 - 300MOQ: 10 Pieces -
FLC12 ABS 9-Bay Workshop Locker — Impact-Resistant, Rustproof Storage for Factory Gear and ToolsUS$ 20 - 300MOQ: 10 Pieces
-
ABS Plastic Locker for Beach Resorts — Salt-Spray Resistant Outdoor Cabinet for Coastal Changing RoomsUS$ 20 - 300MOQ: 10 Pieces
-
1800mmx300mm Waterproof ABS Plastic Locker Cabinet for Gym Changing Rooms – Rust-Free & Easy to CleanUS$ 19 - 100MOQ: 5 Sets
-
Outdoor ABS Locker Cabinet – UV-Resistant Plastic Storage for Poolside or Beach Resorts-Hengna OfficeUS$ 19 - 100MOQ: 5 Sets
Hospital-grade disinfectants destroy painted steel lockers. Quat cleaners, bleach wipes, and alcohol sprays break down the coating within weeks. The exposed steel rusts. The rust flakes into the changing room. The locker gets replaced.
The FLC06 is a nine-section ABS plastic locker built for the exact opposite — it doesn't need paint, doesn't rust when exposed to sanitizers, and wipes clean with whatever the infection control protocol requires. Molded from virgin ABS engineering plastic. Each section fits a change of scrubs, street shoes, and personal items. The unit stands on an 80mm raised base that keeps it off the cleaning mop path. CE certified. One-year warranty. Quote within 24 hours.
Why ABS Replaces Painted Steel in Medical Changing Rooms
Painted steel lockers in a hospital changing room fail from the inside out. Here's the sequence:
First month — a staff member hangs a damp towel over the door. Moisture sits between the towel and the paint. Second month — a small bubble appears under the paint where moisture trapped. Third month — the bubble bursts. Exposed steel meets bleach from the daily cleaning wipe. Fourth month — orange rust runs down the front of the locker. By year two, the bottom edge is rusted through, and the door doesn't close flush.
The problem isn't poor quality steel. It's that paint and metal are two separate materials, and every chip creates a corrosion starting point. Hospital cleaning protocols make it worse — disinfectants accelerate paint failure faster than water does.
ABS is one material all the way through. No paint. No coating. No interface where moisture and chemicals can separate layers. The color comes from molded-in pigment, not surface paint. If the surface gets scratched — and a busy changing room will scratch it — the exposed material is the same color, same density, same chemical resistance.
The manufacturer has supplied ABS lockers for nine years to medical facilities including clinics, hospital staff changing rooms, and veterinary offices. Design life is rated at 20 years under normal use — including daily disinfection.
Key Features
1. Chemical-Resistant Surface
The FLC06 surface handles daily contact with the disinfectants used in medical environments — sodium hypochlorite (bleach), quaternary ammonium compounds, isopropyl alcohol, and hydrogen peroxide wipes. None of these attack the ABS material. The surface stays smooth, non-porous, and free of chemical staining. No special cleaner is required — whatever the facility's infection control team uses, the locker can take it.
2. No Crevices for Bacteria to Settle
The mortise-and-tenon assembly means there are no screw holes, no bolt cavities, no stamped metal pockets where organic matter can collect. Panel joints are tight and smooth. The rounded interior corners eliminate the 90-degree dead zones where cotton fibers and dust accumulate. A staff changing room sees a lot of lint from scrubs — the FLC06 design gives those fibers nowhere to hide.
3. Rounded Exterior Edges
Medical staff move fast between shifts. A nurse changing out of scrubs at the end of a twelve-hour shift isn't paying attention to sharp locker corners. The FLC06 has radiused edges on every panel. In a cramped changing room where multiple people are getting changed simultaneously, this reduces the risk of cuts, torn clothing, and head bumps.
4. 80mm Moisture-Proof Base
The base lifts the entire unit 80mm off the floor. For a clinic changing room that's mopped twice daily, that keeps the locker body above the water line. The base itself is the same ABS material — it doesn't swell, doesn't wick moisture, doesn't develop a musty smell over time. Standard painted steel lockers on the same floor will show rust at the base plate within six months.
5. Tool-Free Assembly
No screws, no bolts, no glue. Panels interlock using a mortise-and-tenon system. A nine-section unit assemblies in about 15 minutes with no tools. No metal hardware inside the locker means nothing to corrode or loosen. If the changing room layout needs to change, the unit disassembles and reassembles without damage.
Feature Summary
| Feature | Benefit for Clinic Environments |
|---|---|
| Virgin ABS plastic | No paint to peel, no coating to fail |
| Chemical-resistant surface | Withstands daily bleach and alcohol wipe-downs |
| Smooth panel joints | No crevices for bacteria or lint buildup |
| Rounded edges | Safer in busy staff changing rooms |
| 80mm raised base | Locker stays above mopped floor water level |
| Mortise-and-tenon assembly | No metal fasteners inside the locker |
Specifications
| Spec | Detail |
|---|---|
| Model | FLC06 |
| Material | Virgin ABS engineering plastic |
| Configuration | 3 columns × 3 rows (9 sections) |
| Single compartment (W×H×D) | 372 × 320 × 420 mm |
| Base height | 80 mm |
| Assembly type | Mortise-and-tenon, tool-free |
| Standard colors | White, grey, light blue, dark blue — medical-friendly tones |
| Custom colors | Available for branding or department coding |
| Lock options | Key lock / combination lock / card reader / touchscreen lock |
| Warranty | 1 year |
| Certifications | CE |
Who Uses This Locker in Medical Settings?
Hospital Staff Changing Rooms
Operating room staff, ER nurses, and floor clinicians change into hospital-provided scrubs before each shift. Their lockers sit in a humid environment created by steam from the hospital laundry rooms nearby and constant foot traffic on wet floors. The FLC06 goes into these rooms because it doesn't depend on paint integrity to stay functional. A bleach wipe across the surface at shift change is standard protocol — the ABS surface doesn't degrade from it.
Outpatient Clinics
Smaller clinics often have one changing room shared by doctors, nurses, and administrative staff. The cleaning schedule is less frequent than a hospital, but when it happens, the cleaner uses whatever the clinic has on hand. The FLC06 handles variable cleaning protocols — bleach, alcohol, peroxide, or just soap and water — all without surface damage.
Veterinary Clinics
Vet clinic changing rooms have different contamination risks — animal dander, urine spray, disinfectant dips. Staff change out of street clothes into clinic scrubs, and the lockers sit in a room that gets fogged with disinfectant spray regularly. The smooth ABS surface doesn't absorb odors, easy cleaning is a daily requirement, and the chemical resistance matches the vet-grade disinfectants used between patients.
Dental Offices
Dental staff changing areas share air with the treatment rooms — meaning aerosolized chemicals and moisture from autoclaves. The FLC06's non-porous surface and chemical resistance suit a dental environment where infection control standards are identical to hospital surgical protocols.
Installation
The FLC06 ships flat-packed in KD form. Each panel is wrapped in moisture-protective film with cardboard corner protectors. Assembly is tool-free and takes about 15 minutes. Units can be stacked vertically or arranged side by side. The modular design means future expansion requires ordering additional units, not replacing existing ones.
Frequently Asked Questions
Can this locker withstand daily bleach cleaning?
Yes. ABS is resistant to sodium hypochlorite (the active ingredient in bleach), quaternary ammonium cleaners, isopropyl alcohol, and hydrogen peroxide. The material does not degrade from repeated exposure to any of the disinfectants used in medical environments.
How does ABS compare to painted steel lockers for infection control?
Painted steel lockers have a coating-to-metal interface that fails when chemicals attack the paint edge. ABS has no coating. The surface is homogenous — scratches expose the same material, not raw steel. There are no screw holes or stamped crevices where bacteria can accumulate.
Is this locker suitable for use near surgical areas?
The FLC06 is designed for staff changing rooms, not for sterile operating rooms directly. It meets the hygiene standards for clean and dirty changing room separation per standard hospital infection control protocols.
What is the warranty and how fast can we get a quote?
One year against manufacturing defects. Quote returned within 24 hours. MOQ is negotiable — single units available for sample testing.
Can you add our clinic logo to the lockers?
Yes. Silk-screen logo printing is available on the door face. Custom colors and OEM orders with custom packaging and manuals are supported.
Get a Quote
Contact Luoyang Hengna Office Furniture Co., Ltd. with the quantity required, preferred color, and destination port. A detailed FOB quote with shipping estimate is returned within 24 hours.
Send Inquiry to This Supplier
You May Also Like
-
6-door Compact ABS Locker Cabinet for Spa and Wellness Centers – Waterproof and StylishUS$ 19 - 100MOQ: 5 Sets
-
Industrial-Grade ABS Plastic Locker for Factory Staff and Warehouse Workers|Hengna OfficeUS$ 19 - 100MOQ: 5 Sets
-
Modular ABS Locker Cabinet - Customizable Plastic Storage Solutions for Gym, School & Office With Waterproof DesignUS$ 19 - 100MOQ: 5 Sets
-
Durable ABS Plastic Lockers With Multiple Compartments - Ideal for Public Facilities, Easy to Clean & MaintainUS$ 19 - 100MOQ: 5 Sets
-
Lightweight ABS Plastic Student Lockers for Primary & Middle Schools - Durable Safe Storage Cabinet With Soft Corner ProtectionUS$ 19 - 100MOQ: 5 Sets
-
Durable ABS Plastic School Lockers With Multiple Lock Options - Secure Storage Solution for High School StudentsUS$ 19 - 100MOQ: 5 Sets
-
Heavy Duty ABS Plastic Lockers for Offices | Durable Employee Storage SolutionsUS$ 19 - 100MOQ: 10 Sets
-
Waterproof ABS Plastic Gym Locker for Fitness Center Changing Room OEM/ODMUS$ 19 - 100MOQ: 10 Sets
-
Hengna Office Durable ABS Plastic Locker for Gym and Spa Use, Rust-Free and Easy to CleanUS$ 19 - 100MOQ: 10 Sets
-
Anti-Rust ABS Locker for Gym Locker Rooms, Custom Size and Color Available 6-doorUS$ 19 - 100MOQ: 10 Sets
