Banana Pi BPI-M1BPI-M1+BPI-M2 Camera
Product Spotlights
| Hardware Specification The camera V3 module is specifically designed for BPi-M3.It include two CMOS sensor module, one is OV5640(5M Pixel),and the other is OV8865(8M Pixel),so you can choose one or two campera for this board. Hardware camera can support 2 scene. one is OV5640 and one is OV8865 Hardware interface cable line Schematic diagram How to use Connect the camera module and BPi-M3 with a 40PIN FFC cable, like the pictures below : BPI-M2+ support OV5640 camera module note: for BPI-M2+ , camera is not same as BPI-M2,BPI-M1.... , it support OV5640 module, not need extend board. you just can direct use OV5640 modue on CSI interface. if you have BPI-M1/M1+/M2 camera module ,you can remove camera module from extend bard ,and can use on BPI-M2+. connect way: |
Send Inquiry to This Supplier
You May Also Like
-
BananaPi BPI-R3 BoardNegotiableMOQ: 1 Piece
-
BananaPi BPI-R3 Mini BoardNegotiableMOQ: 1 Piece
-
BananaPi BPI-R64 BoardNegotiableMOQ: 1 Piece
-
BananaPi BPI-W2 BoardNegotiableMOQ: 1 Piece
-
RK3568 Industrial Android Development Board | Dual Gigabit CAN | D-3568NegotiableMOQ: 1 Piece
-
BPI-SFP-2.5G-T-R-RM For BPI-R3NegotiableMOQ: 1 Piece
-
Friendly Elec NanoPi R76S AI Router & Edge Computing PlatformNegotiableMOQ: 1 Piece
-
RK3288 Industrial IoT Gateway Motherboard | Core + Base Board | GW-3288NegotiableMOQ: 1 Piece
-
Friendly Elec NanoPi R4SE Development BoardNegotiableMOQ: 1 Piece
-
NanoPi R2S Mini Router | RK3328 | Dual Gigabit Ethernet | Edge Computing SBCNegotiableMOQ: 1 Piece