Contact Platform Support
Help CenterNdustrial Bimetallic Thermostatic Steam Trap Manufacturer
Product Spotlights
1.Simple structure,easy to install and maintain,resistant to water hammer and superb emptying performance.
2.Water seal by high-temperature condensate,no leakage of fresh steam (zero leakage).
3.Flexible and noiseless.
4.Water hammer resistance with no effect from abrupt pressure changes.
5.Adoptable for overheat steam system.
6.Adoptable for high-pressure and high-temperature steam pipes.
7.Good air discharge quality with resistance to coldness.
Related Products
-
High Temperature Bimetallic Steam Trap With Threaded ConnectionNegotiableMOQ: 1 Piece -
Forged Steel Bimetallic Steam Trap for Superheated SteamNegotiableMOQ: 1 Piece
-
Flanged Bimetallic Steam Trap for Industrial Steam PipelinesNegotiableMOQ: 1 Piece
-
Energy Saving Bimetallic Thermostatic Steam Trap SupplierNegotiableMOQ: 1 Piece
-
Heavy Duty Bimetallic Steam Trap for Steam Tracing ApplicationsNegotiableMOQ: 1 Piece
The thermo-sensitive element of bimetallic trap is a bimetallic element cast through a special process by two metals of different expansion ratio.When the bimetallic element expands after heated,different expansion ratio results in bending.The thermo-sensitive element produced on the basis of this quality can act as a switch.Bimetallic Traps are divided into adjustable offline (BK,CS17H and CS47) and online (adjustable bimetallic element TB).
Merits
1.Simple structure,easy to install and maintain,resistant to water hammer and superb emptying performance.
2.Water seal by high-temperature condensate,no leakage of fresh steam (zero leakage).
3.Flexible and noiseless.
4.Water hammer resistance with no effect from abrupt pressure changes.
5.Adoptable for overheat steam system.
6.Adoptable for high-pressure and high-temperature steam pipes.
7.Good air discharge quality with resistance to coldness.
Technique parameter
|
Shell pressure grade |
Load leakage |
Used medium |
Permitted Backpressure rate |
Energy saving effect |
Use superheated steam |
|
1.6、 2.5、 4.0、 6.4、 10MPA |
0% |
Steam、 Condensate water |
≥75% |
Excellence |
Adaption |
|
Maximum operating pressure differential |
Freezing resistance |
Drainage method |
Maximum allowable temperature |
Air exhaust system |
Resis |
10.0MPA |
Excellence |
Continue mode |
420~550℃ |
Automatic |
Adaption |
Prime out-form dimensions and weigh
|
Product model |
(DN) Calibre |
L Flange |
L Thread/ welding |
H1 |
H2 |
W |
(kg) weight |
(MPa) Pressure Change range |
(MPa) Nominal pressure |
|
BK284 BK286 |
15~25 32~50 |
230 250 |
130 |
130 |
25 |
160 |
11/16 |
0.1-10.0 |
10.0 |
The materials of primary accessories
|
Part and component name |
Material |
|
Valve body、Valve cover |
Carbon steel、Alloy steel |
|
Bimetal |
Stainless steel |
|
Valve rod |
Stainless steel |
|
Filtrating screen |
Stainless steel |
Send Inquiry to This Supplier
You May Also Like
-
High Pressure Thermostatic Bimetallic Steam Trap FactoryNegotiableMOQ: 1 Piece
-
DN15–DN50 Bimetallic Steam Trap for Steam Distribution SystemsNegotiableMOQ: 1 Piece
-
Carbon Steel Bimetallic Steam Trap for Boiler Steam SystemsNegotiableMOQ: 1 Piece
-
Industrial Thermostatic Steam Trap With Bimetal ElementNegotiableMOQ: 1 Piece
-
Industrial Thermostatic Steam Trap With Bimetal ElementNegotiableMOQ: 1 Piece
-
Bimetallic Steam Trap for Power Plant and Petrochemical IndustryNegotiableMOQ: 1 Piece
-
China Bimetallic Steam Trap Manufacturer & OEM SupplierNegotiableMOQ: 1 Piece
-
Reliable Bimetallic Steam Trap for Industrial Condensate DrainageNegotiableMOQ: 1 Piece
-
Reliable Bimetallic Steam Trap for Industrial Condensate DrainageNegotiableMOQ: 1 Piece
-
Industrial Bimetallic Steam Trap for Efficient Steam System OperationNegotiableMOQ: 1 Piece
