Contact Platform Support
Help CenterFast Penetration Gypsum Screws With Drill Point for Wood Framing, 13mm-100mm Full Sizes
Product Spotlights
Related Products
-
Zinc Plated Plasterboard Screws 13mm-100mm Full Sizes Available Coarse Thread Sharp Point Fast Penetration for Wood FramingUS$ 0.01 - 0.1MOQ: 1000 Pieces -
Plasterboard Screws for Metal Studs and Partition Wall 13mm-100mm Full Sizes Available With Black Phosphate and Sharp PointUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Plasterboard Screws for Wood Framing and Ceiling Installation 13mm-100mm Full Sizes Available Zinc Plated Coarse ThreadUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Plasterboard Screws With Free Samples and Bulk Packing 13mm-100mm Full Sizes Available Factory Direct SupportUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Fine Thread Plasterboard Screws 13mm-100mm Full Sizes Available With Drill Point Black Phosphate Coating No SnappingUS$ 0.01 - 0.1MOQ: 1000 Pieces
Welcome to Hefei SENOTECH New Materials Co., Ltd — your trusted partner for high-performance fastening solutions. Since 2020, we have been exporting premium construction hardware to over 20 countries across North America, South America, Europe, Africa, and Asia, with an annual export value exceeding US$1 million. Our Fast Penetration Gypsum Screws with Drill Point for Wood Framing are engineered to deliver speed, reliability, and cost-efficiency on every job site. Available in full sizes from 13mm to 100mm, these screws combine a razor-sharp drill point with aggressive thread design, ensuring effortless penetration into wood studs without pre-drilling. Whether you are hanging drywall in a residential project or a large commercial building, our screws reduce installation time significantly while maintaining a secure hold.
Key Features & Technical Specifications
- Self-Drilling Point — The sharp drill tip eliminates the need for pilot holes, cutting installation time by up to 40% compared to standard screws.
- Fast Penetration Thread — Optimized coarse thread design ensures rapid engagement and strong pull-out resistance in softwood and hardwood.
- Bugle Head — Countersunk head sits flush with drywall surface, reducing the need for excessive mudding and sanding.
- Full Size Range — From 13mm (1/2 inch) to 100mm (4 inches) to accommodate various drywall thicknesses and wood framing dimensions.
- Durable Carbon Steel Construction — Heat-treated for hardness and toughness, preventing snapping or deformation during high-torque driving.
- Phosphated Surface Finish — Provides corrosion resistance and enhances friction for better grip during installation.
- Compatible with Standard Screw Guns — Works with common drywall screwdrivers and impact drivers with Phillips #2 bits.
| Length (mm) | Equivalent (inch) | Recommended Drywall Thickness | Packaging Quantity (pcs/box) |
|---|---|---|---|
| 13 mm | 1/2" | 6.5 mm (1/4") | 1000 |
| 25 mm | 1" | 12.5 mm (1/2") | 1000 |
| 32 mm | 1-1/4" | 15.9 mm (5/8") | 500 |
| 41 mm | 1-5/8" | 12.7 mm + 2 layers | 500 |
| 51 mm | 2" | 15.9 mm + 2 layers | 250 |
| 64 mm | 2-1/2" | Double layer 12.7 mm | 250 |
| 76 mm | 3" | Heavy-duty framing | 200 |
| 100 mm | 4" | Thick wood studs | 100 |
Why Choose Our Fast Penetration Gypsum Screws?
- Speed-Driven Design — The combination of a sharp drill point and deep threads allows the screw to self-start and drive quickly, reducing labor costs and project timelines.
- Consistent Quality — Manufactured under strict quality control, each screw undergoes dimensional inspection and hardness testing to ensure reliable performance.
- Versatile Compatibility — Suitable for wood studs, OSB, plywood, and even light-gauge metal studs (when using fine thread version available upon request).
- Minimized Material Damage — The bugle head design reduces paper tear and cracking around the screw head, resulting in a cleaner finish.
- Bulk & Custom Options — We offer flexible packaging, from small boxes to large bulk cartons, and can customize packaging with your branding.
Trust & Reliability
As a dedicated supplier since 2020, Hefei SENOTECH New Materials Co., Ltd has served clients across North America, South America, Europe, Africa, Oceania, and Asia. Our annual export value of US$1 million - US$1.5 million reflects the growing trust our customers place in our product quality and service. We maintain a low rate of returns and complaints by ensuring each batch is tested for tensile strength, thread geometry, and drilling efficiency before shipment.
Contact us today for a quote or free samples — experience the difference that fast-penetration engineering makes. Whether you need a standard size from stock or a custom specification, our team responds within 24 hours to provide tailored solutions.
Frequently Asked Questions (FAQ)
Q1: Can these screws be used for both wood and metal studs?
A: Our standard coarse-thread version is optimized for wood framing. For metal studs (light-gauge steel), we recommend our fine-thread variant which is available upon request. Please specify your application when ordering.
Q2: Do I need to pre-drill before using these screws?
A: No. The self-drilling point eliminates the need for pre-drilling in most softwoods and hardwoods. For extremely dense or thick wood, occasional pilot holes may help, but typically not required.
Q3: What is the head type? Does it require a special bit?
A: It features a bugle (countersunk) head with a Phillips #2 drive. Standard drywall screw guns or impact drivers with a PH2 bit work perfectly.
Q4: Are these screws rust-resistant?
A: The screws have a phosphated finish that offers moderate corrosion resistance for interior applications. For outdoor or high-humidity areas, we recommend our galvanized or stainless steel screws (available separately).
Q5: What sizes do you offer? Can I mix sizes in one container?
A: We offer full sizes from 13mm to 100mm as listed in the table above. Mixed-size orders are welcome to optimize inventory. Minimum order quantity may apply per size.
Q6: How are the screws packaged? Can I get custom packaging?
A: Standard packaging is in corrugated boxes with plastic liners. Custom packaging (e.g., retail display boxes, private labeling) is available with minimum order requirements. Contact our sales team for details.
Q7: Do you provide samples before bulk order?
A: Yes, we offer free samples (shipping cost paid by buyer) for specification confirmation and quality evaluation. For first-time clients, samples are highly recommended.
Q8: What is the typical lead time for bulk orders?
A: For standard sizes and stock items, lead time is 7-15 days after payment. For custom specifications or large quantities (20+ tons), lead time may extend to 20-30 days. We always confirm lead time in the quotation.
Send Inquiry to This Supplier
You May Also Like
-
Black Phosphate Plasterboard Screws 13mm-100mm Full Sizes Available With Self-Drilling Point and High Hardness for Ceiling InstallationUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
China Manufacturer Plasterboard Screws 13mm-100mm Full Sizes Available Zinc Plated Coarse Thread High Hardness No SnappingUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Plasterboard Screws 13mm-100mm Full Sizes Available China Manufacturer Wholesale Price With Mill Test Report and WarrantyUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Wholesale Price Plasterboard Screws 13mm-100mm Full Sizes Available Fine Thread Drill Point for Metal StudsUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Factory Direct Plasterboard Screws 13mm-100mm Full Sizes Available With Black Phosphate Coating and Sharp Point for Fast PenetrationUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
China Manufacturer Wallboard Screws Sharp Point for Wood Framing, 13mm-100mm Full Sizes Available Zinc Plated No SnappingUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Free Samples Wallboard Screws 13mm-100mm Full Sizes Available Zinc Plated Sharp Point for Wood Framing, Bulk Packing With WarrantyUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Wholesale Price Wallboard Screws Coarse Thread for Ceiling Installation, 13mm-100mm Full Sizes Available High Hardness Fast PenetrationUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
Factory Direct Wallboard Screws Fine Thread for Metal Studs, 13mm-100mm Full Sizes Available With Black Phosphate CoatingUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
13mm-100mm Full Sizes Available Wallboard Screws Fine Thread Zinc Plated for Metal Studs, High Hardness No SnappingUS$ 0.01 - 0.1MOQ: 1000 Pieces
