4 Door Lab Locker for Staff Room – Chemical Resistant, Powder Coated Steel Cabinet, KD Flat Pack
Product Spotlights
4 Door Lab Locker for Staff Room – Chemical Resistant, Powder Coated Steel Cabinet, KD Flat Pack Spec Sheet
| Item | Specification |
|---|---|
| Product | 4-Door Lab Locker for Staff Room |
| Overall Size | 1800mm H × 850mm W × 420mm D |
| Compartments | 4 doors, 4 compartments (independent) |
| Material | Cold-rolled steel sheet |
| Surface Finish | Electrostatic powder coating, white matte – chemical resistant grade |
| Structure | KD flat pack (knock down) |
| Lock | Individual key lock per door, 2 keys each |
| Hanging Rod | Stainless steel, built-in per compartment |
| Ventilation | Grille slots at bottom of each door |
| Handle | Recessed alloy pull handle – no protruding parts |
| Anchor Points | Pre-drilled at base and rear for wall/floor mounting |
| Assembly Time | ~15 minutes with basic hand tools |
| Packaging | Flat panel + edge protectors + moisture barrier |

4 Door Lab Locker for Staff Room – Chemical Resistant, Powder Coated Steel Cabinet, KD Flat Pack
Lab staff rooms come with a problem most changing areas don't have to deal with: chemical residue.
You walk out of the lab in your coat, brush against the locker door getting changed, and that trace of acid or solvent from your sleeve ends up on the cabinet surface. Do that a few times a week, and a regular painted locker starts showing it – bubbling paint, rust spots around the edges, discoloration that makes the whole room look run down before its time.
That's why lab lockers need a different spec than a school or gym locker. The surface coating isn't decorative. It's the primary defense.
What Makes a Locker "Chemical Resistant"
The powder coating we use isn't the same stuff you'd find on a cheap storage cabinet. Electrostatic powder coating bonds to the steel at a molecular level during the curing process. The result is a dense, non-porous surface that doesn't absorb liquids.
Spill a bleach solution on it during cleaning? Wipe it off, no trace. A splash of acetone or ethanol? Same thing. The coating is formulated to resist common lab disinfectants, mild acids, and solvents that would eat through spray paint or enamel in weeks.
The stainless steel hanging rods serve the same purpose. If someone hangs a lab coat still damp from a quick rinse, the stainless rod won't rust or pit. Cheap chrome-plated rods would. For a lab environment, these details aren't nice-to-have. They're the difference between lockers that last five years and lockers that last fifteen.
Why 4 Compartments Works for Lab Staff
Lab staff rooms have a different flow than factory changing areas. People come in, swap street clothes for lab attire, work their shift, then reverse. They're not storing heavy gear. They need a compact compartment for a change of clothes, personal items, and a place to hang a lab coat or uniform.
The 1800mm × 850mm × 420mm 4-door format hits a sweet spot. Each compartment gives enough room for a set of clothes and a lab coat on the hanging rod, plus small items on the shelf. Four compartments in one unit means a room with 20 lockers handles 80 staff members.
And because these are KD flat pack, you can position units exactly where you need them – along a wall, back-to-back in the center of the room, or in a corner. No struggling with fully assembled cabinets that won't fit through a standard door.
Surface That Stays Clean
Lab environments demand cleanability. The white matte finish isn't just an aesthetic choice – it makes it easy to spot dirt, spills, or contamination. A quick wipe with a disinfectant cloth and the surface is clean.
The door design also matters. Recessed handles mean nothing snags on lab coat sleeves or gloves. The ventilation grilles are at the bottom of each door, positioned to let air circulate without exposing interior contents to splash risk.
Each unit has pre-drilled anchor points if you need to secure them to the wall – common in earthquake-prone regions or facilities with vibration from lab equipment.
KD Flat Pack for Lab Facility Logistics
Lab fit-outs are often part of a larger construction or renovation project. The timeline is tight. The contractor doesn't have time to deal with damaged locker shipments or installation delays.
KD flat pack solves this. Each locker arrives as a stack of flat panels, protected by corner moldings and moisture barrier. Assembly is straightforward – pre-drilled holes line up exactly, hardware is included, and a first-time assembler can finish one unit in about 15 minutes.
For a lab staff room needing 20-50 units, this means:
More units per container = lower shipping cost
Panels fit through standard doorways
Assemble in place – no moving heavy cabinets around
Replace individual panels instead of entire units if damaged
This packaging also matters for sea freight. The flat panels stack efficiently in a 40HQ, so your per-unit landed cost stays competitive. No wasted air volume in the container.
Where These Are Used
We've supplied these lockers for:
University research lab staff rooms in Southeast Asia
Pharmaceutical QC lab facilities in the Middle East
Hospital lab staff changing areas
Independent testing lab facilities in Africa
The common thread: these facilities need lockers that won't degrade from repeated contact with lab chemicals and cleaning agents.
Not Suitable For
If your lab handles concentrated strong acids or bases regularly, consider stainless steel cabinets instead. Powder coating is chemical resistant up to a point, but stainless is the standard for high-risk chemical storage.
Also, if you're looking for cleanroom-rated storage (ISO Class 5 or above), this locker is designed for the staff room, not the cleanroom itself. The ventilation grilles allow air exchange that's fine for changing areas but not appropriate for controlled environments.
FAQ
Are these suitable for GMP-regulated facilities?
Yes – the powder coated surface is easy to clean and doesn't shed particles under normal use. Many of our customers are in regulated lab environments.
Can I get a different color? White is standard. Custom RAL colors available for bulk orders. For lab settings, we recommend sticking with white or light grey – dark colors make contamination harder to spot.
How are they shipped? KD flat pack in corrugated boxes with foam edge protection and moisture barrier wrap. Hardware bag included inside the panel stack.
Sample order? Yes – 1-5 units accepted. Test one before committing to volume.
OEM / custom logo? Yes. Custom logo, packaging, and manuals available for volume orders.
Send Inquiry to This Supplier
You May Also Like
-
Airport Electronic Locker System - Automated Luggage Storage With Digital Payment IntegrationUS$ 430 - 1700MOQ: 5 Sets
-
Hospital Electronic Locker With Biometric Access - Medical Grade Smart Storage for Healthcare FacilitiesUS$ 430 - 1700MOQ: 5 Sets
-
Shopping Mall Electronic Locker System - Customer Smart Storage With QR Code AccessUS$ 430 - 1700MOQ: 5 Sets
-
Apartment Building Electronic Locker - Package Delivery System With Mobile App NotificationUS$ 430 - 1700MOQ: 5 Sets
-
Industrial Electronic Locker System - Heavy-Duty Smart Storage for Factory Workers & ToolsUS$ 430 - 1700MOQ: 5 Sets
-
Recreation Center Electronic Locker - Waterproof Smart Storage With Mobile Key AccessUS$ 430 - 1700MOQ: 5 Sets
-
Library Electronic Locker With Student ID Access - Digital Storage Solution for Educational InstitutionsUS$ 430 - 1700MOQ: 5 Sets
-
Large Capacity Multi-Door Locker for Schools & Sports FacilitiesUS$ 500 - 1000MOQ: 5 Combos
-
Multi-Color Lockers for Office and School UseUS$ 300 - 600MOQ: 5 Combos
-
Modern 2 Door Steel Locker| Metal Wardrobe With Clothes Rod & Mirror: The Ultimate Heavy Duty Storage Solution for Home、Offices and GymsUS$ 40 - 80MOQ: 5 Combos





