PPGI and PPGL Coated Steel Coil Color Coated Cutting Service
Product Spotlights
Color steel coil PPGI and PPGL are pre-coated galvanized steel coils,
Pre-painted steel coil, also known as color-coated steel coil, is produced by using hot-dip galvanized steel coil, Galvalume steel coil, or cold-rolled steel coil as the substrate. After surface degreasing and chemical conversion treatment, one or more layers of organic coatings are continuously roll-coated and baked. Common substrate materials include DX51D, DX52D, SGH400, etc.
In terms of corrosion resistance, the zinc coating weight on the substrate is typically 40–275 g/m² (both sides total), corresponding to a single-side thickness of approximately 6–42 μm, providing basic rust protection. The paint film thickness for the topcoat and backcoat is generally as follows:topcoat 15–25 μm and backcoat 5–10 μm . Common topcoat types include polyester, silicon-modified polyester, high-durability polyester, and polyvinylidene fluoride, allowing for different levels of weather resistance based on the application environment.
In terms of applications, pre-painted steel coil is widely used in the construction industry for roofing and wall systems of industrial plants, warehouses, gymnasiums, airport terminals, and large shopping malls. It is also commonly used in light steel structure buildings, cold storage panels, cleanroom panels, highway guardrails, grain silos, and automotive paint booths. In the home appliance sector, it is used for refrigerator side panels, washing machine front panels, and microwave oven housings. In office furniture, it is used for filing cabinets and desk panels. With its rich color options, convenient installation, corrosion resistance, and long service life, pre-painted steel coil is a high-end steel product in the fields of construction and industrial decoration.
Location |
category |
value |
||
Executive standard |
National standard |
GB/T12754-2019 |
||
American Standard/European Standard |
ASTM A792M |
|||
Cold rolled substrate |
Width specification |
Cold rolled substrate thickness |
Including metallized layer, the thickness after painting |
Label thickness |
1200mm |
≥0.41mm |
≥0.46mm |
≥0.45mm |
|
Size deviation |
Width tolerance |
Upper deviation +4mm |
||
Lower deviation 0 |
||||
thickness |
Upper deviation +0.05mm |
|||
Lower deviation 0 |
||||
Yield Strength |
>300MPA |
|||
tensile strength |
270-500MPA |
|||
elongation after break |
More than 20% |
|||
Steel coil inner diameter |
Standard: 508mm,Except for other agreements |
Send Inquiry to This Supplier
You May Also Like
-
PPGI and PPGL Coated Steel Coil Weather Resistant ProcessingUS$ 545 - 555MOQ: 10 Metric Tons
-
PPGI and PPGL Coated Steel Coil Standard Size Shearing WorkUS$ 545 - 555MOQ: 10 Metric Tons
-
PPGI and PPGL Coated Steel Coil Anti Rust Coated Steel CoilUS$ 545 - 555MOQ: 10 Metric Tons
-
0.25mm 0.35mm 0.42mm Ppgi Coil Blue Zinc Coating 40g Prepainted Galvanized Steel CoilsUS$ 545 - 555MOQ: 10 Metric Tons
-
for Roofing and Building Applications PPGI Galvanized Steel Coil 0.12~1.5mm DX51D Color Coated PPGI CoilsUS$ 545 - 555MOQ: 10 Metric Tons
-
Factory Supply Low Price Color Coated Galvanized Zinc Coating PPGI Prepainted Steel CoilUS$ 545 - 555MOQ: 10 Metric Tons
-
Deep Drawing Quality PPGI Steel Coil Z10-Z29 Coating Full Hard 1.0-2.0mm Thickness Ppgi Coil for Water Heater Outer ShellUS$ 545 - 555MOQ: 10 Metric Tons
-
Ral Color 0.4mm 0.5mm Thickness Metal Roofing Sheets Coil Building Materials PPGI Coils Color Coated Steel CoilUS$ 545 - 555MOQ: 10 Metric Tons
-
Factory Sale Good Quality Hot Sales S280GD PPGI/PPGL CoilUS$ 545 - 555MOQ: 10 Metric Tons
-
Ppgi Ppgi Coils Color Coated Steel Coil Ral9002 White Prepainted Galvanized Steel Coil Ppgi CoilUS$ 545 - 555MOQ: 10 Metric Tons










