Contact Platform Support
Help CenterKeysight E5063A ENA Vector Network Analyzer E5063A-285 2-port Test Set, 100 KHz to 8.5 GHz
Product Spotlights
Related Products
-
Keysight E5063A ENA Vector Network Analyzer E5063A-245 2-port Test Set, 100 KHz to 4.5 GHzNegotiableMOQ: 1 Unit -
Keysight E5063A ENA Vector Network Analyzer E5063A-2H5 2-port Test Set, 100 KHz to 18 GHzNegotiableMOQ: 1 Unit
-
Keysight E5063A ENA Vector Network Analyzer E5063A-205 2-port Test Set, 100 KHz to 500 MHzNegotiableMOQ: 1 Unit
-
Keysight E5063A ENA Vector Network Analyzer E5063A-215 2-port Test Set, 100 KHz to 1.5 GHzNegotiableMOQ: 1 Unit
-
Keysight E5063A ENA Vector Network Analyzer E5063A-235 2-port Test Set, 100 KHz to 3 GHzNegotiableMOQ: 1 Unit
Keysight E5063A ENA Vector Network Analyzer E5063A-285 2-port test set, 100 kHz to 8.5 GHz
Test set
E5063A-285 2-port test set, 100 kHz to 8.5 GHz
E5063A-245 2-port test set, 100 kHz to 4.5 GHz
E5063A-2H5 2-port test set, 100 kHz to 18 GHz
E5063A-205 2-port test set, 100 kHz to 500 MHz
E5063A-215 2-port test set, 100 kHz to 1.5 GHz
E5063A-235 2-port test set, 100 kHz to 3 GHz
E5063A-265 2-port test set, 100 kHz to 6.5 GHz
E5063A-2D5 2-port test set, 100 kHz to 14 GHz
Highlights
Drive Down the Cost of Test for Passive RF Components
The Keysight E5063A ENA is an affordable benchtop vector network analyzer for testing simple passive components such as antennas, f
ilters, cables, or connectors up to 18 GHz. It leverages the consistent measurement framework of the industry standard ENA Series to
boost efficiency and productivity. It is ready to evolve as technologies change.
• Measure a wide range of components with a versatile 2-port, 50-ohm S-parameter test set
• Enhance your measurements with Option 010 for time domain analysis capability
• Simplify PCB design and test with a dedicated graphical user interface with Option 011
• Boost efficiency and productivity with a consistent measurement framework
• Upgrade options at any time
The best solution for PCB design and test
Compared to traditional solutions based on sampling oscilloscopes, the E5063A PCB Analyzer provides three breakthroughs for
PCB design and test:
• More accuracy, repeatability, and reproducibility
• More languages supported
• More ESD robustness
Achieving Higher Measurement Accuracy and Better Correlation for PCB Impedance Test
E5063A Software
Network analyzer software tools enable you to investigate, characterize, and troubleshoot your designs in a variety of measurement
applications. Simplify complex measurements on your E5063A with software applications such as wireless power transfer analysis,
time domain analysis, and more.
E5063A-010 Time Domain Analysis
View transmission and reflection responses in the time domain. Tune filters, gate out fixtures and cables, and characterize transmission lines.
E5063A-011 Time Domain Analysis/Test Wizard
Adds a dedicated interface for PCB manufacturing test for efficient impedance and return loss measurements.
E5063A-006 Wireless Power Transfer Analysis
Measure Wireless Power Transfer (WPT) efficiency between coils or resonators in real-time with arbitrary load impedance setting.
E5063A Network Analyzer Software
Network analyzer software tools enable you to investigate, characterize, and troubleshoot your designs in a variety of measurement applications.
Simplify complex measurements on your E5063A with software applications such as wireless power transfer analysis, frequency offset mode, time
domain analysis, and more.
Data Sheets
Definitions
Specification (spec.):
Warranted performance. All specifications apply at 23 ºC (± 5 ºC), unless otherwise stated, and 90 minutes after the instrument has been turned on.
Specifications include guard bands to account for the expected statistical performance distribution, measurement uncertainties, and changes in
performance due to environmental conditions.
Typical (typ.):
Expected performance of an average unit which does not include guardbands. It is not covered by the product warranty.
General characteristics:
A general, descriptive term that does not imply a level of performance.
Boundary Conditions
In this data sheet, boundary conditions are given for the specifications. For example, system dynamic range is 68 dB with the following boundary
condition.
Frequency: 300 kHz
IF bandwidth: 3 kHz
If the same boundary conditions fall under more than one category in a table, apply the best value.
Send Inquiry to This Supplier
You May Also Like
-
Keysight E5063A ENA Vector Network Analyzer E5063A-265 2-port Test Set, 100 KHz to 6.5 GHzNegotiableMOQ: 1 Unit
-
Keysight E5063A ENA Vector Network Analyzer E5063A-2D5 2-port Test Set, 100 KHz to 14 GHzNegotiableMOQ: 1 Unit
-
Keysight E5061B ENA Vector Network Analyzer 100 KHz to 1.5 or 3 GHzNegotiableMOQ: 1 Unit
-
Keysight E5063A ENA Vector Network Analyzer 100 KHz to 14 GHzNegotiableMOQ: 1 Unit
-
Keysight N5222B N5221B PNA Microwave Network Analyzer 10 MHz to 26.5 GHz, 2 or 4-portNegotiableMOQ: 1 Unit
-
Keysight N1911A Power Meter, Single Chann and N1921A Wideband Power Sensor, 50 MHz to 18 GHzNegotiableMOQ: 1 Unit
-
Keysight N1911A Power Meter, Single Chann and N1922A Wideband Power Sensor, 50 MHz to 40 GHzNegotiableMOQ: 1 Unit
-
Keysight N1912A Power Meter, Single Chann and N1921A Wideband Power Sensor, 50 MHz to 18 GHzNegotiableMOQ: 1 Unit
-
Keysight N1912A Power Meter, Single Chann and N1922A Wideband Power Sensor, 50 MHz to 40 GHzNegotiableMOQ: 1 Unit
-
Keysight N1913B EPM Series Dual-Channel Power Meter Compatible Power Sensors 8480 SeriesNegotiableMOQ: 1 Unit
