Conductive Frp Anode Tube, Cathode Wire, Frp Anode Tube Module
The layered structure of the fiberglass used in the conductive fiberglass anode tube (precipitation electrode) from the inside out is as follows: 1 layer of carbon fiber mat, 2 layers
of chopped fiber strip mats, 3 layers of 0.4mm thick fiberglass cloth, and 1 layer of glass surface mat. The resin used is vinyl resin, which
contains high carbon content (>98%) graphite, flame retardants, etc. This conductive fiberglass material has the advantages of high strength, good rigidity, good
electrical conductivity, and flame retardancy.
Features:
It has strong corrosion resistance and can resist the corrosion of various dilute acids, alkalis, and salt media.
It is light in weight, high in strength, and has stable external dimensions. It will not experience the deformation of the anode tube like the lead precipitation electrode after long - term use,
which extends the service life of the equipment.
It has a compact structure. The honeycomb structure makes the inner and outer surfaces of each anode tube become precipitation surfaces, and there is no dead zone between the anode tubes. Therefore,
for treating flue gas of the same scale, it has a small volume and a small footprint.
It has good flame retardancy. After being tested by the national professional testing institution, the oxygen index of the material can reach over 28%. Therefore, even if there is an arc in the power plant,
it will not ignite the precipitation anode tube.
Send Inquiry to This Supplier
You May Also Like
-
400*200 Grooved Frp Cable Tray, Acid and Alkali Resistant and Corrosion ResistantUS$ 8.46 - 8.77MOQ: 50 Meters
-
200*100 Frp Trough Cable Tray From Hengshui, HebeiUS$ 5.38 - 5.54MOQ: 100 Meters
-
Frp Gas Collection Hood for Deodorization System With Good AirtightnessUS$ 44.62 - 49.23MOQ: 50 Square Meters
-
Frp Gas Collection Hood for Sludge Tank, Deodorizing Gas Collection Hood, Customizable in Various SizesUS$ 44.62 - 46.15MOQ: 100 Square Meters
-
Double-alkali Desulfurization Frp Glass Fiber Reinforced Plastic Spray PipelineUS$ 1461.54 - 1538.46MOQ: 1 Unit
-
Gypsum Fgd Frp Spray Pipe, Spray Layer of Flue Gas Desulfurization TowerUS$ 1461.54 - 1538.46MOQ: 1 Unit
-
Jiangsu Frp Spraying Layer, Frp Spraying Pipe, Absorption Tower Spraying LayerNegotiableMOQ: 0 Set
-
Silicon Carbide Wear-resistant Fiberglass Reinforced Plastic Desulfurization Spray PipeUS$ 1461.54 - 1538.46MOQ: 1 Unit
-
Yike Professional Cement Pool Frp Anti-corrosionUS$ 30.62 - 30.77MOQ: 500 Square Meters
-
Four Layers of Cloth and Six Layers of Oil, Three Layers of Cloth and Five Layers of Oil, Epoxy Resin Frp Anti - CorrosionUS$ 30.62 - 30.77MOQ: 500 Square Meters


