Contact Platform Support
Help Center7 - Centimeter Grass Planting Grids Dedicated to Fire Exits, Supporting for Parking Lot Greening Projects, Manufacturer
Related Products
-
Siphon Drainage System for Garage Roof, Polymer Protective Drainage Profiled Sheet, Engineering SupportingUS$ 2.46MOQ: 1 Square Meter -
Special Siphon Drainage System for Garage Roof Slabs, Manufacturer of Polymer Protective Drainage Profiled SheetsUS$ 2.46MOQ: 1 Square Meter
-
7cm Grass Planting Grids for Fire Exits in Parking Lots, Directly Supplied by Manufacturer With Complete SpecificationsUS$ 3.08MOQ: 1 Square Meter
-
Professionally Produce 7 - Centimeter Flat - Mouth Grass Planting Grids, Specially Used for Parking Lots and Fire Passages, Pressure - Resistant and Wear - ResistantUS$ 3.08MOQ: 1 Square Meter
-
Manufacturer of Siphonic Drainage Boards. Polymer Protective Drainage Profiled Sheets for Garage RoofsUS$ 2.46MOQ: 1 Square Meter
In the process of urbanization, the core pain points faced by fire lanes and parking lot greening projects are becoming increasingly prominent: it is necessary to meet strict fire protection load-bearing requirements and achieve ecological greening functions. Traditional greening solutions often lead to ground collapse due to insufficient load-bearing capacity, or cause waterlogging problems due to poor drainage, seriously affecting fire safety and landscape effects. Jiamei New Materials Co., Ltd., as a professional manufacturer with more than a decade of experience in the drainage system field, relies on the R & D advantages of Tai'an High - tech Development Zone and integrates the concept of sponge city into product design. Our independently developed 'blockchain' intelligent drainage system technology endows the 7 - centimeter grass planting grid with excellent load - dispersion ability and efficient drainage performance, successfully solving the industry problem that it is difficult to reconcile rigid load - bearing and flexible greening.
The grass planting grid specially designed for fire lanes adopts a modular design, and its core working mechanism consists of three major systems:
- Three - dimensional support system: The honeycomb structure converts vertical pressure into lateral tension
- Siphon drainage system: The patented HXC drainage groove enables rapid drainage with zero slope
- Root protection system: The PED polymer protective layer blocks the penetration of plant roots
| Parameters | Indicators | Test standards |
|---|---|---|
| Single grid size | 400×400×70mm | GB/T 1040 |
| Compressive strength | ≥40t/m² | GB/T 228.1 |
| Permeability rate | ≥85% | JTGE 50 |
| Weather resistance | -40℃~80℃ | GB/T 3512 |
| Grass planting survival rate | ≥95% | DB37/T 5228 |
- Reinforced rib position design: The number of longitudinal reinforcing ribs is increased by 30%
- Composite drainage layer: The drainage efficiency of the dual - channel is improved by 45%
- Anti - ultraviolet formula: Nano - titanium dioxide anti - aging agent is added
-
Compared with the traditional 5 cm grass planting grid, the 7 cm structure has significant advantages in ecological compatibility:
- Enhanced rib design: The number of longitudinal reinforcing ribs is increased by 30%
- Composite drainage layer: The drainage efficiency of the dual-channel is improved by 45%
- Anti-ultraviolet formula: Nano titanium dioxide anti-aging agent is added
- Ecological compatibility: The neutral pH value does not damage the plant roots
Jiamei New Materials Co., Ltd. has 22 utility model patents to support product R & D. The 5000-square-meter production base is equipped with 25 automated production lines, with an annual production capacity of 50 million square meters. We hold the second-level construction qualification for waterproofing, anti-corrosion and thermal insulation, the work safety license, and have passed the AAA-level enterprise credit certification. It is recommended that engineering design units focus on the following when selecting grass planting grids:
- For fire lanes, products with a load-bearing grade of ≥35t/m² should be selected
- In sloping sites, it is necessary to use siphon drainage channels
- In the northern regions, it is recommended to choose a formula with a cold resistance coefficient of ≥0.9
FAQ
Q: Can this product meet the requirements for heavy fire trucks to pass through?
A: According to third-party testing, the 7 cm reinforced grass planting grid can bear an axle load of 50 tons on a concrete base, exceeding the 40-ton load requirement of standard fire trucks. It is recommended that the base thickness be ≥15 cm and use the patented sticky adhesive for seamless splicing.
Q: How to prevent soil erosion when applying in sloping parking lots?
A: When the slope is >5%, it is recommended to set up HXC siphon drainage channels every 20 square meters, and cooperate with sediment observation wells to form organized drainage. We provide slope calculation software and can provide customers with a drainage plan for free.
Q: How much does the cost increase compared with ordinary grass planting grids?
A: The material cost of the 7 cm structure is increased by about 18%, but due to the reduction of the base concrete thickness (it can be thinned by 5 cm) and the elimination of additional drainage facilities, the comprehensive project cost is actually reduced by 12%.
Q: How to deal with dust accumulation in the gaps of the grass planting grid?
A: It is recommended to use coarse sand with a particle size of 3 - 5 mm to fill the gaps and cooperate with the patented breathable observation tube, which can achieve a self-cleaning function. According to actual measurement, the gap blockage rate is
Q: Can it be laid on an existing concrete pavement?
A: It is necessary to first roughen the base surface, apply a special adhesive, and then lay a PED polymer protective drainage layer as a buffer. The renovation case shows that the compressive strength can reach 90% of that of a newly built project.
Q: How to prevent frost heave damage in alpine regions?
A: The product uses modified polypropylene raw materials and adds elastomer toughening agents. The low-temperature impact strength retention rate at -40℃ is >85%. It is recommended to set up water storage modules below the frozen soil depth to avoid repeated freezing and thawing.
Send Inquiry to This Supplier
You May Also Like
-
Manufacturer of Siphonic Drainage Boards, Supporting the Drainage System for Garage Roofs, Polymer Profiled SheetsUS$ 2.46MOQ: 1 Square Meter
-
Special Polymer Protective Drainage Profiled Sheet for Garage Roof Slabs, Supporting Siphon Drainage SystemUS$ 2.46MOQ: 1 Square Meter
-
Specialty Polymer Protective Siphon Drainage Profiled Sheets for Garage Roof Drainage SystemsUS$ 2.46MOQ: 1 Square Meter
-
Hdpe Drainage Boards for Construction Projects, Plastic Permeable and Drainage Boards, Customizable as RequiredUS$ 1.23MOQ: 1 Square Meter
-
Supporting for Garage Roof Drainage System, Polymer Protective Siphon Drainage Special-shaped Sheet, Specially Designed for EngineeringUS$ 2.46MOQ: 1 Square Meter
-
Special Polymer Profiled Sheet for Siphonic Drainage System. Manufacturer of Garage Roof Protection and Drainage BoardsUS$ 2.46MOQ: 1 Square Meter
-
Engineering Special Plastic Drainage Board, Hdpe Hydrophobic Board, Moisture-proof and Permeable Material for Basement RoofUS$ 1.23MOQ: 1 Square Meter
-
Special Hdpe Drainage Boards for Basement Garage Roofs, Manufacturer of Plastic Drainage Boards, Bulk Customization SupportedUS$ 1.23MOQ: 1 Square Meter
-
High-density Polyethylene Drainage Board, Special Plastic Hydrophobic Board for Basement Roof, Customization SupportedUS$ 1.23MOQ: 1 Square Meter
-
Plastic Drainage Boards for Construction, High-density Polyethylene Hydrophobic Boards, Engineering Moisture-proof and Permeable MaterialsUS$ 1.23MOQ: 1 Square Meter
