Contact Platform Support
Help CenterKeysight N9960A FieldFox Handheld Microwave Spectrum Analyzer,300 KHz to 32 GHz
Product Spotlights
Keysight's FieldFox handheld spectrum analyzers are equipped to handle your toughest working environments during routine maintenance, in-depth troubleshooting, and anything in between. Choose the Keysight FieldFox configuration that best meets your needs.
Related Products
-
Keysight N9961A FieldFox Handheld Microwave Spectrum Analyzer, 300 KHz to 44 GHzNegotiableMOQ: 1 Unit -
Keysight N9962A FieldFox Handheld Microwave Spectrum Analyzer, 300 KHz to 50 GHzNegotiableMOQ: 1 Unit
-
Keysight N9936B FieldFox Handheld Microwave Spectrum Analyzer, 9 KHz to 14 GHzNegotiableMOQ: 1 Unit
-
Keysight N9937B FieldFox Handheld Microwave Spectrum Analyzer, 9 KHz to 18 GHzNegotiableMOQ: 1 Unit
-
Keysight N9938B FieldFox Handheld Microwave Spectrum Analyzer, 9 KHz to 26.5 GHzNegotiableMOQ: 1 Unit
Keysight N9960A FieldFox Handheld Microwave Spectrum Analyzer,300 kHz to 32 GHz
FieldFox Handheld Microwave Spectrum Analyzer N9960A ：300 kHz to 32 GHz
FieldFox Handheld Microwave Spectrum Analyzer N9961A ：300 kHz to 44 GHz
FieldFox Handheld Microwave Spectrum Analyzer N9962A ：300 kHz to 50 GHz
A lightweight, durable, microwave spectrum analyzer, interference analyzer, distance-tracking
generator, preamplifier, power meter, and more
Highlights
Never Sacrifice Capability or Portability
Keysight's FieldFox handheld spectrum analyzers are equipped to handle your toughest working environments during routine maintenance, in-depth troubleshooting, and anything in between. Choose the Keysight FieldFox configuration that best meets your needs.
• Make accurate spectrum analyzer measurements (± 0.5 dB) without warmup.
• Capture intermittent signals with 10 MHz gap-free, real-time bandwidth.
• Characterize radar pulse profiles with a portable solution.
• Perform over-the-air measurements for 5G TF and LTE.
• Capture I/Q data for RF signal monitoring and analysis.
• Use GPS/GNSS for geolocation and timestamping.
• Carry one lightweight unit at 3.2 kg (7.1 lb).
What's included:
• AC/DC adapter
• Localized power cord
• Rechargeable Li-ion battery
• Soft carrying case with backpack and shoulder straps
• Quick Reference Guide
Data Sheets
Specification (spec)
Specifications include guardbands to account for the expected statistical performance distribution,
measurement uncertainties, and changes in performance due to environmental conditions. Specifications are warranted performance. FieldFox must be within its calibration cycle. No warm-up required for the spectrum
analyzer specifications listed on pages 25 through 50.
Typical
Describes additional product performance information not covered by the product warranty. It is performance beyond specifications that 80% of the units exhibit with a 90% confidence level over the temperature range
23 ± 5°C, unless otherwise noted. Typical performance does not include measurement uncertainty. FieldFox
must be within its calibration cycle.
Nominal
A general, descriptive term or design parameter. It is not tested, and not covered by the product warranty.
FieldFox must be within its calibration cycle.
Test port output specifications
High power in N991xA and N992xA refers to the target output power level of the analyzer when the Power
Setting is set to High. As an example, if you have a frequency sweep from 3 to 6.5 GHz, the analyzer will achieve
the power level of -1 dBm across the band.
Low power level for N991xA and N992xA analyzers is a flat -45 dBm across the whole frequency band and is the output of the analyzer when the Power Setting is set to Low.
High power in the N995xA refers to the target output power level of the analyzer when the Power Setting is set
to High. As an example, if you have a frequency sweep from 39 to 46 GHz, the analyzer will achieve the power
level of -2 dBm across the band.
Low power level for N995xA analyzers is the lowest power level that can be set and is the output of the analyzer
when the Power Setting is set to Low.
Max leveled power in the N995xA refers to the maximum leveled (flattened) power that can be achieved across
the designated frequency range. For example, if you have a frequency sweep from 32 to 44 GHz and set up the analyzer to measure all four S-parameters, needing both ports 1 and 2, the maximum power the analyzer can be
set to is -6 dBm.
WhatsApp：+85268839563
WeChat ：13728300615
Send Inquiry to This Supplier
You May Also Like
-
Keysight N9933C FieldFox C Handheld Microwave Spectrum Analyzer, 3 KHz to 4 GHzNegotiableMOQ: 1 Unit
-
Keysight N9934C FieldFox C Handheld Microwave Spectrum Analyzer, 3 KHz to 6.5 GHzNegotiableMOQ: 1 Unit
-
Keysight N9935C FieldFox C Handheld Microwave Spectrum Analyzer, 3 KHz to 10 GHzNegotiableMOQ: 1 Unit
-
Keysight N9960D FieldFox Handheld Microwave Spectrum Analyzer, 9 KHz to 32 GHzNegotiableMOQ: 1 Unit
-
Keysight N9961D FieldFox Handheld Microwave Spectrum Analyzer, 9 KHz to 44 GHzNegotiableMOQ: 1 Unit
-
Keysight N9962D FieldFox Handheld Microwave Spectrum Analyzer, 9 KHz to 50 GHzNegotiableMOQ: 1 Unit
-
Keysight N9963D FieldFox Handheld Microwave Spectrum Analyzer, 9 KHz to 54 GHzNegotiableMOQ: 1 Unit
-
Keysight N9913A FieldFox Handheld RF Analyzer, 30 KHz to 4 GHzNegotiableMOQ: 1 Unit
-
Keysight N9914A FieldFox Handheld RF Analyzer, 30 KHz to 6.5 GHzNegotiableMOQ: 1 Unit
-
Keysight N9915A FieldFox Handheld Microwave Analyzer, 30 KHz to 9 GHzNegotiableMOQ: 1 Unit
