Contact Platform Support
Help CenterAutoclave-vacuum Autoclave-carbon Fiber Autoclave
Product Spotlights
Related Products
-
Autoclave-vacuum Autoclave-carbon Fiber AutoclaveNegotiableMOQ: 1 Combo -
Autoclav/RetortNegotiableMOQ: 1 Set
-
Autoclave 100l Autoclave 50 Liter Pilot RetortNegotiableMOQ: 1
-
Automatic Autoclave 50-60hzNegotiableMOQ: 1 Piece
-
SCAIR 10HP 0.8MPa Dental Compressor for Surgical Handpieces & Sterilization AutoclavesNegotiableMOQ: 1 Unit
Effective working diameter: customized
Effective working length: customized
Curing pressure: 0~10Mpa
Curing temperature: 0~500℃
Vacuum degree: -0.098mpa
Number of vacuum paths: customized
Control system: The software can realize closed-loop PID control of equipment temperature and pressure; all autoclave program control can be realized on the PC, including vacuum control, pressure control, temperature control, cooling system control, etc.;
Monitoring main interface: displays equipment operation status and program execution status
Column diagram interface for each thermocouple: Displays the data of each thermocouple and the condition of the failure of the thermocouple.
Puppet screen: Graphically displays the position of the puppet on the product in the autoclave, allowing craftsmen to judge the uniformity of the temperature field of the product. It is very useful for controlling the curing process of large products.
Real-time curve screen: Graphically displays the curing process of the workpiece and its comparison with the set process
Vacuum operation: In the automatic running program, vacuuming can be achieved in conjunction with temperature and time. At the same time, this software can realize spot test separation and manual automatic switching. Free combination of vacuum pumping pipeline and vacuum measuring pipeline
Automatic operation: The process curve can be programmed, the number of program segments is not limited, and the correlation between pressure, vacuum, temperature value and time can be realized. After writing the process, you can perform program error correction through simulation.
Compensation interface: It is convenient to correct the display value of the thermocouple during regular measurement calibration and improve the control accuracy.
Parameter setting interface: This interface displays the refined inherent control parameters of the autoclave and is open to maintenance personnel. By adjusting the parameters, the malfunction of the autoclave caused by the aging of components can be corrected.
IO diagnostic interface: This interface is open to maintenance personnel to facilitate checking the IO fault of the device. The software has compiled an internal self-test program, which is very effective for maintenance and can quickly and accurately find equipment fault points.
Prompt interface: This software has set up many prompt screens to prevent misoperations.
Send Inquiry to This Supplier
You May Also Like
-
Low Price Professional Made CNHTC SITRAK C7H/T7H/T5G Cabin Assembly YG1600822111 Autoclaved Hose AssemblyNegotiableMOQ: 1
-
Autoclave Sterilizer Autoclave Machine Dental AutoclaveNegotiableMOQ: 1 Set
-
SELON AUTOCLAVE PRICE, AUTOCLAVE MACHINE, AUTOCLAVE STERILIZERNegotiableMOQ: 2 Sets
-
Brick Autoclave, Block Forming AutoclaveNegotiableMOQ: 1 Set
-
Best Service of High Pressure Autoclave, Industrial Steam Autoclave, Autoclave PriceNegotiableMOQ: 1 Set
-
Autoclavable FermenterUS$ 1,000 - 10,000MOQ: 1 Set
-
Low Price Steam Autoclave Sterilizer Autoclaves PriceNegotiableMOQ: 1 Unit
-
MG Work Clothes Autoclave Vacuum Steam AutoclaveNegotiableMOQ: 1 Set
-
Autoclave Indicator LabelUS$ 6 - 12MOQ: 10 Pieces
-
Autoclave Rubber SealUS$ 0.001 - 0.1MOQ: 500 Pieces
