Explosion-proof Flame Detector QRA4.U Burner Flame Detector QRA4M.U
Product Spotlights
Explosion-proof flame detector QRA4.U burner flame detector QRA4M.U
When the UV flame detector senses the presence of ultraviolet light, the alternating current through the phototube is converted into direct current by the rectifier, the signal amplifier amplifies the direct current and then outputs it. The UVS 10 is generally used with the SFD 258 burner controller and the SFW15 flame amplifier to monitor the flame of various atmospheric burners and combustion air burners. It is widely used in industrial heating systems such as steel, machinery, glass, cerics, plastics and chemical industries. l Aluminum housing. l High monitoring sensitivity; l Not sensitive to sunlight, infrared and light; Anti-interference and short-circuit protection in the flame signal circuit; l Wide range of ambient temperature adaptability;
Send Inquiry to This Supplier
You May Also Like
-
AGQ3.1A27 Flame Detector Conversion Module AGQ1.1A27 Signal ConverterUS$ 10 - 1000MOQ: 1 Unit
-
AGA25.2 Actuator Regulator AGA30.2 Damping Orifice ValveUS$ 10 - 1000MOQ: 1 Unit
-
Quartz Glass AGG02 Flame Detector Attachment AGG03 Thermal Insulation GlassUS$ 10 - 1000MOQ: 1 Unit
-
Threaded Casing AGG06 Flame Detector Attachment AGG16.CUS$ 10 - 1000MOQ: 1 Unit
-
AGG5.210 Ignition Transformer AGG5.220 Burner High Voltage PackUS$ 10 - 1000MOQ: 1 Unit
-
AGG5.310 Speed Sensor AGG5.315 Motor Speed SensorUS$ 10 - 1000MOQ: 1 Unit
-
Connector Terminal AGG3.131 Component Package AGG5.720US$ 10 - 1000MOQ: 1 Unit
-
Canbus Connecting Cable AGG5.641 Panel Connecting Cable AGG5.635US$ 10 - 1000MOQ: 1 Unit
-
AGR450240650 Flame Detector Bulb AGR450211310US$ 10 - 1000MOQ: 1 Unit
-
AGM23 Flame Detector Plug AGM19US$ 10 - 1000MOQ: 1 Unit




