Manufacturer of Four-Stroke Small Marine Outboard Motors
Nongfengli Machinery Equipment Factory
Mobile No.:18954089767
1、Four-Stroke Operating Cycle: Follows four independent strokes—intake, compression, power, and exhaust—to complete one working cycle, sharing the same principle as automobile engines.
2、Independent Lubrication System: Equipped with a dedicated oil tank and oil pump, it uses pure gasoline (no pre-mixed oil required). The oil circulates to lubricate the moving parts inside the engine.
3、Valve Mechanism: Utilizes intake and exhaust valves to control the inflow and outflow of gases, typically featuring an overhead camshaft (OHC) design.
4、Relatively Complex Structure: Compared to two-stroke models, it incorporates additional components such as a valve mechanism and an independent lubrication system (including an oil pan, oil pump, and filter), resulting in an overall more sophisticated structure.
5、Relatively Heavier Weight: Due to its more complex structure, it is usually slightly heavier than two-stroke models of the same horsepower. However, modern design advancements have significantly narrowed this gap, especially in the small-horsepower range.
6、Stable and Quiet Operation: Its inherent working cycle and design result in significantly lower vibration and noise levels compared to two-stroke engines.
7、High Fuel Efficiency: Enables more complete combustion and higher thermal energy utilization.
1、Excellent Fuel EconomyThis is one of its most prominent advantages. The four-stroke design ensures more complete and efficient fuel combustion. Compared to two-stroke engines of the same horsepower, it typically saves 20%-50% on fuel consumption. This is crucial for users who require long-duration navigation, face inconvenient refueling conditions, or have budget constraints.
2、Low Environmental EmissionsHigher combustion efficiency significantly reduces the emission of unburned hydrocarbons. Since there is no need to mix oil with gasoline for combustion, it eliminates the blue smoke (caused by oil combustion) and the direct discharge of unburned oil into water bodies—issues unique to two-stroke engines. It also meets increasingly stringent environmental regulations (such as EPA, CARB, and EU RCD standards).
3、Extremely Quiet and Stable OperationThe four-stroke cycle itself ensures smoother operation, and when combined with its precise mechanical structure, it achieves much lower noise and vibration levels than two-stroke engines. This greatly enhances passenger comfort, making it particularly suitable for scenarios such as fishing (to avoid disturbing fish schools), leisure cruising, and family outings.
4、Convenient Use (No Pre-Mixing Required)It can be directly refueled with regular unleaded gasoline, eliminating the need for pre-mixing oil and gasoline. This avoids the risk of engine damage due to incorrect mixing ratios, making operation simpler and cleaner.
5、Minimal Oil ConsumptionThe independent lubrication system allows oil to only circulate and lubricate inside the engine, with almost no oil burned or discharged (normal consumption is negligible). Users only need to change the oil regularly (similar to automobile maintenance), rather than continuously adding oil to the fuel like in two-stroke engines, resulting in greater long-term cost-effectiveness.
6、Superior Low-Speed TorqueFour-stroke engines typically deliver more abundant and smooth torque at low speeds, enabling better low-speed maneuverability. This makes them perform exceptionally well in scenarios requiring precise speed control, such as entering/exiting marinas, berthing, towing, or fishing (where precise boat speed control is needed).
7、Cleaner OperationThere is no blue smoke or pungent odor caused by oil combustion, keeping the exhaust outlet and the rear of the hull cleaner and reducing oil accumulation. Additionally, spark plug carbon deposition is generally less severe than in two-stroke engines.
8、High Reliability and Long Service LifeAlthough its structure is more complex, modern small four-stroke technology is highly mature. The independent oil circulation system provides continuous and effective lubrication and heat dissipation, significantly reducing wear on key moving parts (such as pistons, crankshafts, and camshafts). With proper maintenance, its service life is generally longer than that of two-stroke engines of the same class.
Send Inquiry to This Supplier
You May Also Like
-
Factory Direct: New Powerful 4-Stroke Outboard, Fuel-SavingUS$ 183.04 - 185.9MOQ: 10 Cartons
-
Factory Direct: New Powerful 4-Stroke Outboard, Fuel-SavingUS$ 186 - 192MOQ: 10 Cartons
-
7.5HP Gasoline Stern Thruster / Outboard Motor ManufacturerUS$ 129 - 132MOQ: 10 Combos
-
Manufacturer of Four-Stroke Small Gasoline Outboard Motors and Propellers for Fishing BoatsUS$ 183.37 - 186.23MOQ: 10 Cartons
-
Small Gasoline Yamaha-style 2-stroke Rear-steering Marine Outboard MotorUS$ 544 - 558MOQ: 10 Cartons
-
2-Stroke 6HP Short Shaft Manual Start Gasoline Outboard Engine, High-Quality WaterStar 6 HP Outboard MotorUS$ 344 - 367MOQ: 10 Cartons
-
Zongshen Engine Gasoline Outboard Motor, Air-Cooled 4-Stroke, for Agricultural and Fishing Boats (Stern/Transom Mount) - Propeller FactoryUS$ 183.31 - 186.2MOQ: 10 Cartons
-
Outboard Motor, Gasoline Outboard Motor, 2-Stroke Outboard Engine, Portable Outboard Motor, Small Fishing Boat Motor.US$ 183.5 - 186.4MOQ: 10 Cartons
-
9HP Portable Outboard Motor for Fishing Inflatable Boats - Durable, Fuel-Efficient Gas Engine - Wholesale AvailableUS$ 183.5 - 186.4MOQ: 10 Cartons
-
Gasoline 7.5 HP 4-Stroke Outboard Motor, Long Shaft - Best Selling High Power Boat Engine PropellerUS$ 144 - 152MOQ: 10 Cartons












