Fall Protection Anchoring System Complying With EN353-1 Standard for Tower and Pole
JV type vertical lifeline system, fully stainess steel,it used for fall arrest purpose ,widely applicated on the telecom tpwer, lattice tower, self-supporting tower, Greenfield, Rooftop tower, etc.
Compliance to EN353-1 standard.
The system is fixed by the bolt, without any welding or punching works, easy installation ,no special requirements and tools.
Top mounted is energy absorber, minimun breaking strength >15kN,full SS316 material.
Intermediate cable guide is SS304,installed every 10 meter,used for preventing wire rope swing .
Bottom bracket with tensioner, SS304 ,minimun breaking strength >15kN.
SS316 cable slider with aluminum carabiner,it has non-inverting system to prevent installing the device upside down the anchor line,minimum breaking strength >15kn.
Stainless steel vertical lifeline assembled on self-supporting tower ,complying with EN353-1 Standard.
Delivery
Send Inquiry to This Supplier
You May Also Like
-
Vertical Lifeline Used for Safety Ladder Climbing SystemUS$ 200 - 5000MOQ: 5 Sets
-
Fall Protection System Vertical Lifeline for Microwave TowerUS$ 200 - 5000MOQ: 5 Sets
-
Vertical Lifeline With Extension for Safety Cage LadderUS$ 200 - 5000MOQ: 5 Sets
-
EN Lifelines for Telecommunication Tower and Mast Fall ProtectionUS$ 200 - 5000MOQ: 5 Sets
-
8mm EN Standard Fall Arrest Device for Communication Tower and Transmission Pole Safety ClimbingUS$ 200 - 5000MOQ: 5 Sets
-
Stainless Steel Wire Rope Fall Arresting System Used for Fall ProtectionUS$ 200 - 5000MOQ: 5 Sets
-
JVW Vertical Lifeline System for Work at Height SafetyUS$ 300 - 3000MOQ: 5 Sets
-
Vertical Stainless Steel Lifelines For Telecom Tower /MonopoleUS$ 200 - 5000MOQ: 5 Sets
-
8mm Vertical Lifeline for Monopole and High Mast Safety ClimbingUS$ 100 - 3000MOQ: 5 Sets
-
8mm Fall Arrest System Lifeline for Self-supporting Tower and Communication Towers 30~120mUS$ 100 - 2000MOQ: 5 Sets








