Contact Platform Support
Help CenterNeodymium Iron Boron Magnet With Square Counterbore m4 Screw Holes and Black Epoxy Coating, 25x25x13mm
Related Products
-
Hexagonal Neodymium Iron Boron Magnets With Gold-plated Surfaces and Holes Drilled in the Middle (with Holes)US$ 0.31MOQ: 1000 Pieces -
Ferrite Radial 4-pole Ring Rotor Magnetic Steel Hollow Cylinder for Water Pump Motors, D12.4 x d5 x 25 mmNegotiableMOQ: 0
-
4x4mm Small-diameter Cylindrical Neodymium Iron Boron Magnets in Black Epoxy, With a Magnetic Field Strength Greater Than 4200 GaussNegotiableMOQ: 0 Piece
-
Custom Processing Quotation for Comma-shaped Magnets of N52 Grade and Complex Special-shaped Neodymium Iron Boron MagnetsUS$ 0.15MOQ: 10000 Pieces
-
Ultra-thin Square Ndfeb Rare-earth Strong Magnet N52 With a Thickness of 0.5mm, 10x10x0.5mmNegotiableMOQ: 0
This is a black square magnet with a counterbore, made of rare earth neodymium. The specific dimensions are 25mm in length and width, and 13mm in thickness. The magnetization direction is along the thickness. This sample is coated with black epoxy resin, which can extend the service life of the magnet and prevent the magnet from corrosion and oxidation. This magnet has an M4 counterbore in the center, and this combination is very common when assembling some large objects. Selecting an epoxy resin coating for NdFeB magnets can provide good anti-corrosion protection. When NdFeB magnets come into contact with air, water, or other chemicals, it can prevent oxidation and corrosion, which is particularly important for magnets used in outdoor applications, humid environments, or in contact with chemicals. If you have any requirements for M4 hole magnets, please contact us, and we can customize the number and position of the holes for you.
Send Inquiry to This Supplier
You May Also Like
-
Small Short Bar-shaped Ndfeb Magnets (n42) Magnetized in the Length Direction, 1.5x1.5x10mmNegotiableMOQ: 0 Piece
-
Surface Galvanized Fan-shaped, Trapezoidal, Arc-shaped Segmented Spliced Ring Motor Magnetic Steel Magnets, CustomizableNegotiableMOQ: 0
-
Single-sided 4-pole Magnetized Ferrite Circular Disc Magnet, Circular Ring is Also Acceptable, D20x3mmNegotiableMOQ: 0
-
Small-diameter Cylindrical Ndfeb Magnets With Electroplated Electroless Nickel Coating, Diameter 2mm x Thickness 2mmNegotiableMOQ: 0
-
4-pole Injection-molded Ferrite Magnetic Ring With a Copper Sleeve in the Middle Inner Hole, Plastic Magnetic Ring, Outer Diameter 15mm, Thickness 2.5mmNegotiableMOQ: 0
-
Tiny-sized Neodymium Iron Boron Magnet Blocks, Ultra-thin Square Magnetic Sheets, 4.5x2.5x0.7mm, N52, CustomizableUS$ 0.08MOQ: 10000 Pieces
-
Single-sided Axial Multi-pole 12-pair (24-pole) Injection-molded Neodymium-iron-boron Small Magnetic Ring, 13.8mm x 2mm x 4mmUS$ 0.15MOQ: 10000 Pieces
-
Radially Sintered Ferrite Magnetic Ring for Motors With an Outer Diameter of 30mm, Multi-pole, 8 Poles/16 PolesUS$ 0.28MOQ: 10000 Pieces
-
1mm Ultra-thin Radially Magnetized Ring Neodymium Strong Magnet, D29x18x1mmNegotiableMOQ: 0
-
Ferrite Ring Magnet of Y10 Grade With 20mm Outer Diameter, 6mm Thickness, 4 Poles (2n2s), and the Same PolarityNegotiableMOQ: 0 Piece
