HousehoidLightning Surge Protector (LSP)lndustrial Lightning Protection Surge Protector (LPSP)
The working principle of a surge protector is that when a transient voltage appears on the protected circuit, the Surge Protective Device (SPD) will limit the transient voltage and divert the current back to its source or to ground. An SPD must have at least one nonlinear component that switches between high-impedance and low-impedance states under different conditions. Under normal operating voltage, the SPD is in a high-impedance state and does not affect the system. When a transient voltage occurs on the circuit, the SPD enters a conducting state (or low-impedance state) and diverts the surge current back to its source or to ground. This limits or clamps the voltage to a safer level. After the transient is diverted, the SPD automatically resets to its high-impedance state.
Send Inquiry to This Supplier
You May Also Like
-
Signal SPDUS$ 10 - 300MOQ: 100 Bags
-
Network SPDCNY 200 - 2000MOQ: 200000 Pieces
-
100KA SPDNegotiableMOQ: 50 Sets
-
Autoprotected SPDsUS$ 1 - 10MOQ: 100 Pieces
-
SOLAR SpdUS$ 14 - 30MOQ: 10 Pieces
-
Exustar, Cleats, Track, SPD, SPD System, Bike, CyclingNegotiableMOQ: 100 Pairs
-
SPD Graphite PlateNegotiableMOQ: 1 Ton
-
Chuangyuan Power Video Data 3 in 1 SPD/ Combination Type SPDUS$ 6 - 10MOQ: 10 Pieces
-
Spd Surge Protective DevicesUS$ 1 - 10MOQ: 1000 Pieces
-
Surge Protective Device(SPD)NegotiableMOQ: 50 Pieces





